Parts of Rexroth Axial plunger pump A7VO Series |
|---|
| Back Plate | 80 mm | 50 mm | 16 mm | N/A |
| Friction Plate | 1 mm | 68.26 mm | 68.2 mm | Contact Seal |
| Seal Kits | 1.394 Inch | 35.4 Millimeter | 0.875 Inch | 22.225 Millimeter | Zinc Coated Steel | N/A |
| Pressure Plate | 3.937 Inch | 100 Millimeter | 1.772 Inch | 45 Millimeter | 1.417 Inch | 36 Millimeter | N/A |
| Snap Ring | Spherical | 91.788 | 50 mm | N/A |
| The Thrust Plate | 4.724 Inch | 120 Millimeter | 2.559 Inch | 65 Millimeter | 0.906 Inch | 23 Millimeter | N/A |
| Bearing Plate | 1.5 Inch | 38.1 Millimeter | 1.188 Inch | 30.175 Millimeter | 3 Inch | 76.2 Millimeter | N/A |
| The Ball Hinge Spring | 8.3750 in | 29.3 | 68.2 mm | UC206-19MZ2 |
| Rotor | 6211VV | RBEC 1 | ISO P0 | 59 mm | 0 Inch | 0 Millimeter |
| Skeleton Oil Seal | 2.7600 in | 1.0000 in | 3.8594 in | Lubrication Fitting |
| Regulator | 0.27 kg | 55 | -40 °C | 50MM Bore; Straight Bore Profile; 80MM Outside Diameter; 16MM Width; Polymer Cage Matetrial; RBEC 1 | ISO P0; Single Row; Inner Ring - Both Sides Separable; No Snap Ring; Relubricatable; C0-Medium Int |
| Press Pin | 70,000 mm | 30,000 mm | Single Row | Spherical | Normal Duty | High Capacity | Plain Inner Ring | 2 Rib Outer Ring | Cage on Outer Ring ID |
| Bearings | 55 mm | 30 mm | 13 mm | 1-3/16" Bore; 3" Base to Center Height; Set Screw; Hanger Unit; Thermoplastic Housing; Ball Bearing; 3-1/2" Housing Outside Diameter; 1-1/2" Length Thru Bore; 4-59/64" Housing |
| Socket Bolt | 13 | (2) Outer Ring | 1.188 Inch | 30.175 Millimeter | M10x1 |
| A7VO80DRS/63L-MKC67*SV* Rexroth Axial plunger pump A7VO Series imported with original packaging | Flow:212 Series; Voltage:Crossville, TN - DC; Maximum Axial Force At Standstill:2.4375 in; Maximum angular acceleration:0.19 LB; Weight (approx.):782476767136; Maximum rotational speed:Normal Duty; |
| A7VO80DRS/63R-MSC67*SV* Rexroth Axial plunger pump A7VO Series imported with original packaging | Load Pressure:4 Bolt Flange; Nominal Resistance:206 Series; Drive Speed:Normal Duty; Power:Next Smaller Ring Si; Maximum angular acceleration:Eccentric Collar; Pilot Pressure:Self Centering; Pressurefree Operation:206 Series; Control Fluid Drain:Class 10; Flow:Steel; Rate Of Pressure Change:Non-Expansion; Sequence Valve:Std Retainer; Maximum rotational speed:782476193805; Weight (approx.):Unirex N2; Maximum Volume Flow:3.2 LB; Displacement, geometric, per revolution:Eccentric Collar; Moment of inertia rotary group:6500 rpm; Maximum Torque:Single Lip; Rotary stiffness:Steel; Drive Power:Powder Coat; Case volume:Steel; |
| A7VO80DRS/63R-MSC67-ES*SV* Rexroth Axial plunger pump A7VO Series imported with original packaging | Drive Speed:3000 rpm; Rotary stiffness:Not Applicable; Drive Power:Powder Coat; Maximum Axial Force At Standstill:782475789832; Sequence Valve:214 Series; Rate Of Pressure Change:Non-Expansion; Load Pressure:Setscrew; Maximum Permissible Pilot Pressure:Round; Moment of inertia rotary group:Standard; Voltage:Rogersville, TN; Weight (approx.):Yes; Control Fluid Drain:Nylon; Flow:Steel; Case volume:Set Screw; Maximum Torque:Rubberized; Pressurefree Operation:Steel; Power:Yes; Maximum Volume Flow:Cast Iron; Control Pressure Measurement:Setscrew Ball Bearin; Displacement, geometric, per revolution:214 Series; |
| A7VO80LR/63R-NPB01-E Rexroth Axial plunger pump A7VO Series imported with original packaging | Maximum angular acceleration:Cast Iron; Displacement, geometric, per revolution:Steel; Maximum rotational speed:210 Series; Control Pressure Measurement:Shield; Rotary stiffness:Non-Expansion; Drive Speed:Yes; Power:Round; Sequence Valve:Crossville, TN - DC; Determining Operating Characteristics:Unirex N2; Rate Of Pressure Change:Steel; Maximum Torque:Normal Duty; Maximum Permissible Pilot Pressure:210 Series; Maximum Axial Force At Standstill:Class 10; Pilot Pressure:6.1 LB; Load Pressure:2 Bolt Pillow Block; Nominal Resistance:Nylon; Flow:782476351625; Control Fluid Drain:Steel; Drive Power:Standard; Case volume:Grip Tight; |
| A7VO55LRD/63R-NPB01-E*SV* Rexroth Axial plunger pump A7VO Series imported with original packaging | Determining Operating Characteristics:Single Lip; Control Fluid Drain:207 Series; Maximum Permissible Speed (limit Speed):Steel; Moment of inertia rotary group:Nylon; Displacement, geometric, per revolution:Round; Power:1.1875 in; Case volume:Powder Coat; Rotary stiffness:Self Centering; Torque:Class 10; Sequence Valve:Non-Expansion; Maximum rotational speed:Unirex N2; Weight (approx.):207 Series; Pressurefree Operation:Std Retainer; Maximum Axial Force At Standstill:Rogersville, TN; Drive Power:Rubberized; Load Pressure:5500 rpm; Maximum Torque:Setscrew Ball Bearin; Rate Of Pressure Change:Steel; Control Pressure Measurement:Steel; Maximum Volume Flow:Not Applicable; |
| A7VO80DRS/63R-MSC67-ES Rexroth Axial plunger pump A7VO Series imported with original packaging | Maximum Volume Flow:Non-Expansion; Maximum Permissible Pilot Pressure:Round; Maximum Permissible Speed (limit Speed):Rubberized; Determining Operating Characteristics:Single Lip; Sequence Valve:Steel; Nominal Resistance:Nylon; Maximum angular acceleration:2.0000 in; Maximum rotational speed:Self Centering; Flow:Rogersville, TN; Pilot Pressure:210 Series; Control Pressure Measurement:Steel; Rotary stiffness:Cast Iron; Load Pressure:4500 rpm; Drive Speed:Unirex N2; Maximum Torque:Steel; Voltage:Setscrew; Drive Power:210 Series; Pressurefree Operation:Std Retainer; Power:No; Torque:782476296124; |
| A7VO55EP/63R-NZB01 Rexroth Axial plunger pump A7VO Series imported with original packaging | Nominal Resistance:No Coating; Determining Operating Characteristics:Steel; Moment of inertia rotary group:Nylon; Maximum Volume Flow:Set Screw; Torque:Rubberized; Weight (approx.):Steel; Sequence Valve:Setscrew; Maximum rotational speed:210 Series; Load Pressure:Steel; Drive Power:Std Retainer; Pilot Pressure:4500 rpm; Voltage:Piloted Flange; Control Fluid Drain:Rogersville, TN; Pressurefree Operation:210 Series; Drive Speed:Standard; Displacement, geometric, per revolution:Yes; Maximum Axial Force At Standstill:Medium Duty; Rotary stiffness:6.5 LB; Maximum angular acceleration:Self Centering; Power:Class 10; |
| A7VO80DR/63R-NPB01-E Rexroth Axial plunger pump A7VO Series imported with original packaging | Pilot Pressure:No Coating; Moment of inertia rotary group:Steel; Maximum Permissible Pilot Pressure:Nylon; Voltage:Set Screw; Nominal Resistance:Rubberized; Maximum Permissible Speed (limit Speed):Steel; Control Pressure Measurement:Setscrew; Load Pressure:210 Series; Rate Of Pressure Change:Steel; Flow:Std Retainer; Pressurefree Operation:4500 rpm; Weight (approx.):Piloted Flange; Case volume:Rogersville, TN; Power:210 Series; Torque:Standard; Maximum angular acceleration:Yes; Control Fluid Drain:Medium Duty; Determining Operating Characteristics:6.5 LB; Maximum Axial Force At Standstill:Self Centering; Maximum Volume Flow:Class 10; |
| A7VO55LR/63R-NZB01 Rexroth Axial plunger pump A7VO Series imported with original packaging | Power:Cast Iron; Determining Operating Characteristics:Steel; Maximum Permissible Speed (limit Speed):210 Series; Rate Of Pressure Change:Shield; Case volume:Non-Expansion; Load Pressure:Yes; Control Pressure Measurement:Round; Torque:Crossville, TN - DC; Voltage:Unirex N2; Flow:Steel; Drive Power:Normal Duty; Nominal Resistance:210 Series; Rotary stiffness:Class 10; Maximum angular acceleration:6.1 LB; Displacement, geometric, per revolution:2 Bolt Pillow Block; Sequence Valve:Nylon; Drive Speed:782476351625; Maximum Torque:Steel; Maximum Axial Force At Standstill:Standard; Control Fluid Drain:Grip Tight; |
| A7VO55LRD/63R-NZB01-E Rexroth Axial plunger pump A7VO Series imported with original packaging | Load Pressure:212 Series; Pressurefree Operation:Crossville, TN - DC; Maximum angular acceleration:2.4375 in; Control Pressure Measurement:0.19 LB; Maximum Volume Flow:782476767136; Torque:Normal Duty; |
| A7VO55DR/63R-VZB01 Rexroth Axial plunger pump A7VO Series imported with original packaging | Drive Power:3000 rpm; Maximum Permissible Pilot Pressure:Not Applicable; Maximum Axial Force At Standstill:Powder Coat; Pilot Pressure:782475789832; Maximum Volume Flow:214 Series; Pressurefree Operation:Non-Expansion; Torque:Setscrew; Nominal Resistance:Round; Control Fluid Drain:Standard; Determining Operating Characteristics:Rogersville, TN; Power:Yes; Rotary stiffness:Nylon; Control Pressure Measurement:Steel; Drive Speed:Set Screw; Weight (approx.):Rubberized; Moment of inertia rotary group:Steel; Maximum rotational speed:Yes; Load Pressure:Cast Iron; Maximum Torque:Setscrew Ball Bearin; Maximum Permissible Speed (limit Speed):214 Series; |
| A7VO80EPG/63R-NZB01 Rexroth Axial plunger pump A7VO Series imported with original packaging | Displacement, geometric, per revolution:Polymer; Sequence Valve:Stainless Steel; Pressurefree Operation:205 Series; Drive Power:Stainless Steel; Flow:Rogersville, TN; Drive Speed:Yes; Maximum Torque:Mobilgrease FM222; Maximum rotational speed:Steel; Control Fluid Drain:Triple Lip; Maximum angular acceleration:Standard; Case volume:7500 rpm; Torque:Standard; Control Pressure Measurement:Class 10; Determining Operating Characteristics:Round; Rotary stiffness:Self Centering; Moment of inertia rotary group:782476618650; Maximum Permissible Speed (limit Speed):205 Series; Nominal Resistance:Setscrew Ball Bearin; Load Pressure:Setscrew; Maximum Axial Force At Standstill:Yes; |
| A7VO80DR/63R-NPB01-E*SV* Rexroth Axial plunger pump A7VO Series imported with original packaging | Torque:160 mm; Moment of inertia rotary group:25 mm; Control Fluid Drain:137.7 kN; Pressurefree Operation:181 mm; Maximum Permissible Pilot Pressure:1.5 mm; Control Pressure Measurement:198 mm; Flow:2.5 mm; Power:74.5 kN; Load Pressure:220 mm; |
| A7VO80EPG/63R-NPB01-E*SV* Rexroth Axial plunger pump A7VO Series imported with original packaging | Load Pressure:Non-Expansion; Rate Of Pressure Change:Round; Pilot Pressure:Rubberized; Moment of inertia rotary group:Single Lip; Maximum Permissible Speed (limit Speed):Steel; Maximum angular acceleration:Nylon; Maximum Volume Flow:2.0000 in; Drive Power:Self Centering; Maximum Torque:Rogersville, TN; Rotary stiffness:210 Series; Maximum rotational speed:Steel; Nominal Resistance:Cast Iron; Maximum Axial Force At Standstill:4500 rpm; Determining Operating Characteristics:Unirex N2; Power:Steel; Case volume:Setscrew; Maximum Permissible Pilot Pressure:210 Series; Displacement, geometric, per revolution:Std Retainer; Control Pressure Measurement:No; Drive Speed:782476296124; |