Parts of Original Rexroth A10VSO Series Piston Pump | ||||||||
---|---|---|---|---|---|---|---|---|
Set Plate | 60 mm | 110 mm | Inner Ring - One Side | NBR | ||||
Coil Spring | 160 mm | 290 mm | 0.35 | 22 | ||||
Oil Distribution Disc Plug | 1.504 Inch | 38.202 Millimeter | 1.755 Inch | 44.577 Millimeter | 4.0 | N/A | ||||
Press Pin | 0.43 Hz | 5705 | 0.0 | N/A | ||||
Cylinder Block | 6.299 Inch | 160 Millimeter | 11.417 Inch | 290 Millimeter | 0.0 | N/A | ||||
Regulator | 2,400 rpm | 2.5 mm | 0.0 | N/A | ||||
The Thrust Plate | Needle Bearing | 10-32 | 0.0 | N/A | ||||
Seal Kit For Hyd Pump | Yes | NBR | 0.0 | N/A | ||||
Swing | 4 in | 7-1/2 in | 34300 lbf | 0.57 | ||||
Valve Plates | 6.0000 in | 3.6875 in | 34300 lbf | NJ232E.M1.C3 | ||||
Friction Plate | 1.14 | 1.4 | 10-32 | 0.380 in | ||||
Seal Kits | Needle Bearing | Stud Type | 48 mm | 31171530 |