Parts of Original Rexroth A10VSO Series Piston Pump | ||||||||
---|---|---|---|---|---|---|---|---|
Swash Plate | 47 mm | 40 | 0.062 Kg | 0,62 Kg | ||||
Rod | 90 mm | 40 mm | 0,62 Kg | 23 mm | ||||
Back Plate | 6.693 Inch | 170 Millimeter | 3.74 Inch | 95 Millimeter | 2.61 | Uncoated | ||||
Seal Kit For Hyd Pump | 4.875 Inch | 123.83 Millimeter | 2.938 Inch | 74.625 Millimeter | 15.935 | 3.5 Inch | 88.9 Millimeter | ||||
Friction Plate | 31171504 | 12000 rpm | - | Non-Flanged Cup | ||||
Guide Ball | 12 mm | 8 mm | - | 12 mm | ||||
Swash Plate Assemblies | 17.9960 in | 13.5060 in | Chrome Steel | 95.000 mm | ||||
Housings Casings | 1/2 in | 1/4 in | 9.8 Inch | 250Millimeter | 95MM Bore; 170MM Outside Diameter; 32MM Outer Race Width; 2 Seals; Ball Bearing; ABEC 1 | ISO P0; No Filling Slot; No Snap Ring; No Internal Special Features; C3-Loose Internal Clearance; Steel Cage; | ||||
Separator | 95 mm | 60 mm | 0.280 kg | 11 mm | ||||
Regulator | 140 mm | 65 mm | Cylindrical Bore | 16 mm | ||||
Push Rod | 160mm | 90mm | 35.1 | 30mm | ||||
Ball Joint | 170.0000 mm | 95.000 mm | 95MM Bore; 170MM Outside Diameter; 32MM Outer Race Width; 2 Seals; Ball Bearing; ABEC 1 | ISO P0; No Filling Slot; No Snap Ring; No Internal Special Features; C3-Loose Internal Clearance; Steel Cage; | 32.00 mm | ||||
Shoe Plates | 380 mm | 280 mm | 40 mm | 100 mm | ||||
Gear Pump | 55 kN | 16.5 | 40x90x23 | 20 |