Parts of Original Rexroth A10VSO Series Piston Pump | ||||||||
---|---|---|---|---|---|---|---|---|
Snap Ring | 50 mm | 82 mm | 21,5 mm | 310mm | ||||
Socket Bolt | 39,2 | 0.0 | AM6527-A0 | 0001030000 | ||||
Central Shaft | 0.625 Inch | 15.875 Millimeter | 0.875 Inch | 22.225 Millimeter | 0.75 Inch | 19.05 Millimeter | 0.027 | ||||
Inclined Plate | 24 mm | 1 (Single) | 2,5 mm | - | ||||
Shafts | 3.15 Inch | 80 Millimeter | 6.693 Inch | 170 Millimeter | 1.535 Inch | 39 Millimeter | 4.17 | ||||
Valve Plates | 3,3 mm | 0001030000 | 4.17 | 1.9 | ||||
Housings Casings | 65 | Double | 28 mm | - | ||||
Block Cylinder | 12 | 5/8" Bore; 7/8" Outside Diameter; 3/4" Width; Needle Roller Bearing; Inner Ring Only; Not Applicable Enclosure; No Self Aligning; Not Applicable Retainer; Not Applicable of Rollers; No | 38,3 | 11 mm | ||||
Pump Right Rotating Group | 1,66 Kg | 135 mm | 152,4 mm | 27 mm | ||||
Separator | 200mm | 310mm | 109mm | N/A | ||||
Bearing Plate | 8 mm | 24 mm | 12,62 mm | 2,5 mm | ||||
Plunger Sliding Boots | 65 mm | 120 mm | 31 mm | 3 000 r/min | ||||
Spindle | 76,2 mm | 152,4 mm | 36,322 mm | 115 mm | ||||
Swash Plate Assemblies | 152,4 | SH33M | Wheel Bearing | 31171512 |