Parts of Original Rexroth A10VSO Series Piston Pump | ||||||||
---|---|---|---|---|---|---|---|---|
Rotor | 76,2 mm | 130,175 mm | 160 | 70 | ||||
Seal Kits | 25 mm | 52 mm | Tapered hole adapter type | 42 mm | ||||
Housings Casings | 1.25 Inch | 31.75 Millimeter | 2.563 Inch | 65.1 Millimeter | 0.272 | 1-1/4" Bore; 2-9/16" Outside Diameter; 3/4" Outer Race Width; 2 Seals; Ball Bearing; Non Precision; No Filling Slot; Yes Snap Ring; Wide Inner Ring Internal Special Features | ||||
Swash Plate Assy | 0.75 Inch | 19.05 Millimeter | 1.688 Inch | 42.875 Millimeter | 1.165 | 3/4" Bore; 1-11/16" Outside Diameter; 1/2" Outer Race Width; Open; Ball Bearing; ABEC 1 | ISO P0; No Filling Slot; No Snap Ring; Wide Inner Ring | No Cage Internal Special Features; C0- | ||||
The Ball Hinge Spring | 1.2500 in | AM6527A0 MG 900 950 25 NBR NOK | 950 | 32.5 kN | ||||
Pressure Plate | 13.5060 in | 17.9960 in | 31.75 mm | 15 | ||||
Spacer | 18 mm | 0.6600 in | 0.62 lbs | 42 mm | ||||
Swash Plate Assemblies | 76,2 | 52mm | 0.563 Inch | 14.3 Millimeter | ABEC 1 | ISO P0 | ||||
Separator | 89 kN | 52 | 60.9 kN | 76,2 mm | ||||
Cylinder Blocks | 70 | 113 mm | 1-1/4" Bore; 2-9/16" Outside Diameter; 3/4" Outer Race Width; 2 Seals; Ball Bearing; Non Precision; No Filling Slot; Yes Snap Ring; Wide Inner Ring Internal Special Features | 165mm | ||||
Bearings | 100mm | 165mm | 2 Seals | 419.1 mm | ||||
Push Rod | 76,76 mm | 0.2 | Bearing Steel | 18 mm | ||||
Shafts | 52100 Chrome steel, or equivalent | 1,320,000 | 6901 | 1-1/4" Bore; 2-9/16" Outside Diameter; 3/4" Outer Race Width; 2 Seals; Ball Bearing; Non Precision; No Filling Slot; Yes Snap Ring; Wide Inner Ring Internal Special Features |