Parts of Original Rexroth A10VSO Series Piston Pump | ||||||||
---|---|---|---|---|---|---|---|---|
Bearings | 20 mm | 21.4 mm | 0.69 kg | Bearing Steel | ||||
Cylinder | 0.669 Inch | 17 Millimeter | 0.669 Inch | 17 Millimeter | 0.009 | 0.827 Inch | 21 Millimeter | ||||
Shafts | 12.7500 in | Not Applicable | - | 0.009 | ||||
Disc Springs | NBR | 6,5 mm | - | 5600 RPM | ||||
Rod | M6x1 | 85 mm | 0.15 | M6x1 | ||||
Piston Sets | 50 mm | 16 mm | 58 mm | 80 mm | ||||
Bearing Plate | 6.8270 in | 2.5000 in | 60.8 lbs | 12.7500 in | ||||
The Thrust Plate | 130 | 64 | DIN 625-1 | 230 | ||||
Skeleton Oil Seal | 24.2 mm | MG 315 360 20 NBR | 0.02 | ZZ (Double Shield) | ||||
Plunger Sliding Boots | 8 mm | 8 mm | 0.02 | 21 mm | ||||
Set Plate | 85 mm | 49,21 mm | 100 mm | 150 mm | ||||
Separator | 130 | 3 | 6.65 kN | 58 mm | ||||
Valve Plate | 3 | 152 kN | Clear Anodize | 6 mm |