Parts of Original Rexroth A10VSO Series Piston Pump | ||||||||
---|---|---|---|---|---|---|---|---|
Ball Guide | 420 mm | 300 mm | 56,1 Kg | 450 r/min | ||||
Bushing Spring | 150 mm | 70 mm | 371 | 51 mm | ||||
Press Pin | 4.921 Inch | 125 Millimeter | 3.15 Inch | 80 Millimeter | 0.922 | 0.866 Inch | 22 Millimeter | ||||
Cylinder | Heavy Duty | [Carbon Steel] 52100 Bearing Steel | 3.995 | Metric Series | ||||
Seal Kits | 5 Inch | 127 Millimeter | 2.688 Inch | 68.275 Millimeter | 2.02 | 80MM Bore; 125MM Outside Diameter; 22MM Width; Open Enclosure; ABEC 7 | ISO P4 Precision; Steel Ball Material; 1 (Single) Bearings; 15 Degree Contact Angle; Phenolic Cage Material; 1 Rib Outer Ring Ra | ||||
Rotor | 23 | STEEL | 0.005 | 2-19/32 in | ||||
Guide Ball | 10-1/4 in | 1.9375 in | 22.3 | 2-19/32 in | ||||
Housings Casings | 6 Days | 7.3750 in | 35,2 kN | 2,1 Kg | ||||
Ball Joint | 15,88 mm | 90 | 300 mm | Standard | ||||
Cylinder Block | 12 | 670 | Cast Iron | 8 | ||||
The Thrust Plate | 33,338 mm | 304 | 1.76 | METRIC | ||||
Seal Kit For Hyd Pump | 140 mm | 65 mm | 1 (Single) | 33 mm |