Parts of Original Rexroth A10VSO Series Piston Pump | ||||||||
---|---|---|---|---|---|---|---|---|
Block Springs | 66,675 mm | 35,179 mm | 3.15 Inch | 80 Millimeter | Cylindrical Roller Bearing | ||||
Push Rod | 150 mm | 100 mm | 1,25 Kg | 24 mm | ||||
Cylinder Blocks | 28 mm | 12 mm | 0,05 Kg | 8 mm | ||||
Separator | 8.858 Inch | 225 Millimeter | 7.874 Inch | 200 Millimeter | 4.999 | 3.15 Inch | 80 Millimeter | ||||
Seal Kit For Hyd Pump | 5.118 Inch | 130 Millimeter | 2.362 Inch | 60 Millimeter | 2.11 | 1.22 Inch | 31 Millimeter | ||||
Spindle | 8865590037483 | .4375 in | 29.8 | AP0382-E0 | ||||
Valve Plates | 143 mm | 66,675 | 0.285 | 0.0 | ||||
Bushing Spring | 12x28x8 | Plain Inner Ring | 0.234 | 31171547 | ||||
Central Shaft | 4.5938 in | 1.1875 in | 42,3 kN | 3.2500 in | ||||
Socket Bolt | 3.1496 in | 40 mm | 66,675 | 1.4960 in | ||||
Plunger Sliding Boots | 14,5 mm | Click here | 2.362 Inch | 60 Millimeter | Composite | ||||
Snap Ring | 200MM Bore; 225MM Outside Diameter; 80MM Width; Needle Roller Bearing; Inner Ring Only; No Self Aligning; No Separable; No Relubricatable | Straight | 143 mm | 7 |