Parts of Original Rexroth A10VSO Series Piston Pump | ||||||||
---|---|---|---|---|---|---|---|---|
Snap Ring | 20 mm | 6,35 | 9,4 kN | 21 mm | ||||
Inclined Plate | 75 mm | 160 mm | 269 kN | 17 mm | ||||
Press Pin | 105 | 125 mm | 165 kN | Non-expansion | ||||
Seal Kits | 6,35 mm | 9,525 mm | 0,417 kN | 3,175 mm | ||||
Friction Plate | 40 mm | 52 mm | Accu-Loc | 7 mm | ||||
Valve Plate | 20 mm | Yes | 12.8 kN | 34 mm | ||||
Pump Right Rotating Group | 2 Inch | 50.8 Millimeter | 3.78 Inch | 96 Millimeter | T-Shaped | 20 | ||||
Saddle Bearing | CN | Double | Bearings with Housings | SCOE204-20 | ||||
Coil Spring | 1.2500 in | 4-1/2" to 5-1/4" | 900 | 1-3/4 in | ||||
Rotor | 60 mm | 130 mm | 420 | 2.1250 in | ||||
Socket Bolt | 400 | 6,35 | 1360 | 1-5/8 in | ||||
Swing | 50 | Concentric Collar | MG 800 860 30 NBR | 4-1/2" to 5-1/4" | ||||
Shoe Plates | 30mm | 60mm | 60 mm | 231mm | ||||
Valve Plates | 75 mm | 54 mm | 63 mm | 90 |