Parts of Original Rexroth A10VSO Series Piston Pump | ||||||||
---|---|---|---|---|---|---|---|---|
Pressure Plate | 14 | 20 mm | 10.28 Hz | 7,7 kN | ||||
Bearings | 190 mm | 290 mm | 75 mm | 7,7 kN | ||||
Back Plate | 50 mm | 90 mm | 23 mm | 19 mm | ||||
The Ball Hinge Spring | 30 mm | 62 mm | 23.8 mm | Bearing | ||||
Block Cylinder | 36.51 mm | 60 mm | 42.9 mm | 25.7 kN | ||||
Regulator | 190x290x75 | 0.4 Hz | 58.5 mm | 30MM Bore; 62MM Outside Diameter; 23.825MM Outer Race Diameter; 2 Seals; Ball Bearing; ABEC 1 | ISO P0; No Filling Slot; No Snap Ring; No Internal Special Features | ||||
Swash Plate Assemblies | 1.772 Inch | 45 Millimeter | 3.346 Inch | 85 Millimeter | 2.9 mm | 17mm | ||||
Barrel Washer | 0.5000 in | 3.3750 to 4.1250 in | 1.2188 in | 0.938 Inch | 23.825 Millimeter | ||||
Inclined Plate | 15 mm | 35 mm | 11 mm | No | ||||
Central Shaft | 50 mm | 90 mm | 30,2 mm | 30,2 mm | ||||
Seal Kits | 9,000 mm | 20,000 mm | 6,000 mm | 6,000 mm | ||||
Pump Right Rotating Group | 6 mm | 8482.50.00.00 | 10.28 Hz | 100 °C |