Parts of Original Rexroth A10VSO Series Piston Pump | ||||||||
---|---|---|---|---|---|---|---|---|
Regulator | 0.0 | N/A | 10.896 | [Steel] Steel | ||||
Bushing Spring | 0.0 | N/A | 9.8 Inch | 248.9 Millimeter | 610 | ||||
Coil Spring | 0.0 | N/A | 2.379 | None | ||||
Ball Guide | 0.0 | N/A | 6.33 | 1 (Single) | ||||
Plunger Sliding Boots | 0.0 | N/A | 0.18 | Single Row | Deep Groove | C4 Clearance | ||||
Barrel Washer | Ball Deep Groove | -22 to 400°F | Metric | MSM150BRHHTPS | ||||
Pressure Plate | 0.21 | Open | 0.2 lb | METRIC | ||||
Oil Distribution Plate | Ball Deep Groove | 3926904590.US | 29507-1110 | 382A, 382, 383A | ||||
Gear Pump | 2.1250 in | 0 Inch | 0Millimeter | 4 Bolt Pillow Block; 65MM Bore; 88.9MM Base to Center Height; V Lock Mount; Spherical Roller Bearing; 230.124MM Minimum Bolt Spacing; 265.176MM Bolt Spacing Maximum; Relubricatable; Cast Steel; Teflon | 2.5 in | ||||
The Thrust Plate | 2.559 Inch | 65 Millimeter | 3/4 Inch | 2.0 in | Double | ||||
Rotor | -22 to 400°F | 3926904590.US | 25 ~ 35 | Double | ||||
Rod | Brass | 0.6250 in | Take-Up | 24.3 in |