Parts of Original Rexroth A10VSO Series Piston Pump | ||||||||
---|---|---|---|---|---|---|---|---|
Snap Ring | 990,000 | 31,85 kN | 210 | 140 | ||||
Disc Springs | 2,1 Kg | Take Up Bearing Only; 25MM Bore; 13.5MM Slot Width; 76MM Slot to Slot Distance; Ball Bearing; Unit Only; Set Screw Mount; UC205 Insert Part; Cast Iron Housing Material | Single Row | Spherical | Normal Duty | Wide Inner Race | Wide Slot | 45 mm | ||||
Regulator | 0,64 Kg | N/A | 0.0 | 25 mm | ||||
Plunger Sliding Boots | 1.621 | N/A | 0.0 | 2.165 Inch | 55 Millimeter | ||||
Skeleton Oil Seal | 0.73 | N/A | 0.0 | 0.984 Inch | 25 Millimeter | ||||
Piston Sets | Tapered | N/A | 0.0 | 8482.10.50.28 | ||||
The Ball Hinge Spring | - | N/A | 0.0 | 19.95 | ||||
Shafts | 19.95 | N/A | 0.0 | 5.875 Inch | 149.225 Millimeter | ||||
Separator | 1.49 | N/A | 0.0 | 2.165 Inch | 55 Millimeter | ||||
Block Cylinder | 0.248 | N/A | 0.0 | 1.181 Inch | 30 Millimeter | ||||
Rotor | 2.18 | N/A | 0.0 | 8 | ||||
Pump Right Rotating Group | 11.0 lb | Assembly | 8 | 57,2 mm | ||||
Oil Distribution Plate | http://www.timken.com | Phenolic | 30MM Bore; 55MM Outside Diameter; 26MM Width; Open Enclosure; ABEC 7 | ISO P4 Precision; Steel Ball Material; 2 (1 Pair) Bearings; 25 Degree Contact Angle; Phenolic Cage Material; 1 Rib Outer Ring Rac | 8 mm | ||||
Saddle Bearing | Metric | 0.31 in | Non-expansion | 1.49 |