Parts of Original Rexroth A10VSO Series Piston Pump | ||||||||
---|---|---|---|---|---|---|---|---|
Cylinder Block | 100 mm | 190 mm | 39,62 mm | 4,9 Kg | ||||
Guide Ball | 80 mm | 321 kN | 1140 kN | 14,5 Kg | ||||
Skeleton Oil Seal | 20 mm | 42,5 mm | 10 mm | 31 mm | ||||
Seal Kit For Hyd Pump | 16 mm | 18 mm | 125 mm | 147 mm | ||||
Servo Piston | 76,2 mm | 149,225 mm | 321 kN | 4,15 Kg | ||||
Inclined Plate | 0.2 in | 44200 lbf | 47,62 | 1.161 | ||||
Friction Plate | 0,8 mm | 4,9 Kg | 0,8 mm | 0.163 | ||||
Pressure Plate | 2500 r/min | 18 mm | 77000 lbf | 2.2 | ||||
Saddle Bearing | 9.0000 in | 1140 | 2.6250 in | 182 mm | ||||
Bushing Spring | 75.000 mm | 105.0000 mm | N/A | 1140 kN | ||||
Drive Shaft | 63,5 mm | 110 mm | 46,038 mm | 10.24 in | ||||
Bearings | NBR | 3600 rpm | 321 kN | 110 mm |