Parts of Original Rexroth A10VSO Series Piston Pump | ||||||||
---|---|---|---|---|---|---|---|---|
Bearings | 285,75 mm | 380,898 mm | 0.22 | 112,8 mm | ||||
The Ball Hinge Spring | 90 mm | 170 mm | 7,34 Kg | 50,5 mm | ||||
Disc Springs | 155 | 163 | 0.355 Kg | 89 mm | ||||
Plunger Sliding Boots | 21 | RBEC 1 | ISO P0 | 2600 RPM | 170 mm | ||||
Ball Guide | 90x170x97.5 | 1060 | 0.118 | Duplex-Universal | ||||
Swash Plate Assemblies | 2.953 Inch | 75 Millimeter | 6.299 Inch | 160 Millimeter | 3.66 | 1.457 Inch | 37 Millimeter | ||||
Valve Plate | 0.984 Inch | 25 Millimeter | 2.047 Inch | 52 Millimeter | 0.175 | 0.709 Inch | 18 Millimeter | ||||
Coil Spring | 170 mm | 5900 1/min / Reference speed | - | 0.22 | ||||
Set Plate | 1.969 Inch | 50 Millimeter | 3.543 Inch | 90 Millimeter | 2.12 | 1.575 Inch | 40 Millimeter | ||||
Central Shaft | 1.0000 in | 285,75 | 25MM Bore; Straight Bore Profile; 52MM Outside Diameter; 18MM Width; Steel Cage Matetrial; RBEC 1 | ISO P0; Single Row; Not Separable; No Snap Ring; Relubricatable; C0-Medium Internal Clearance; Retai | 6.299 Inch | 160 Millimeter | ||||
Swash Plate Assy | 1060 mm | 1500 mm | 1.7500 in | 325 mm | ||||
Retainer Plate | 97,5 | 2600 RPM | 6 Kg | 2.12 | ||||
Pressure Plate | 75 mm | 130 mm | 25MM Bore; Straight Bore Profile; 52MM Outside Diameter; 18MM Width; Steel Cage Matetrial; RBEC 1 | ISO P0; Single Row; Not Separable; No Snap Ring; Relubricatable; C0-Medium Internal Clearance; Retai | 25 mm | ||||
Bearing Plate | 2.12 | Stud Side, Stud End | C0-Medium | 75 mm |