Parts of Original Rexroth A10VSO Series Piston Pump | ||||||||
---|---|---|---|---|---|---|---|---|
Seal Kit For Hyd Pump | 140 mm | 65 mm | 135,7 kN | 4,1 Kg | ||||
Press Pin | 80 mm | 35 mm | 51 kN | 0,73 Kg | ||||
Barrel Washer | 11,112 mm | 6,35 | 2,04 kN | 0,0018 Kg | ||||
The Ball Hinge Spring | 12.7 mm | 6.35 mm | 1.143 mm | 11.6 mm | ||||
Separator | 0 Inch | 0 Millimeter | 1.75 Inch | 44.45 Millimeter | 35x80x34.9 | 0.197 | ||||
Oil Distribution Disc Plug | 1.437 Inch | 36.5 Millimeter | 0.984 Inch | 25 Millimeter | Single Row | Normal Duty | Wide Inner Race | Corrosion Resistant | 0.231 | ||||
Rotor | 1 (Single) | 4800 r/min | 1220,000 | 0.019 | ||||
Shoe Piston | 2,04 kN | 2 Inch | 50.8 Millimeter | 1.126 Inch | 28.6 Millimeter | 4.1 | ||||
Spacer | 1.378 Inch | 35 Millimeter | 0.669 Inch | 17 Millimeter | Standard | 0.041 | ||||
Back Plate | 36 kN | Inch | 0 Inch | 0 Millimeter | 35 | ||||
Pressure Plate | 1220,000 mm | 850,000 mm | 850,000 mm | http://www.timken.com | ||||
Block Cylinder | 62 mm | 35 mm | 31171533 | Single Row | Spherical | Normal Duty | Wide Inner Race | Wide Slot | Closed End | ||||
Block Springs | 130 mm | 50 mm | 31 mm | Take Up Bearing Only; 2" Bore; 1-1/16" Slot Width; 5-1/8" Slot to Slot Distance; Ball Bearing; Unit Only; Set Screw Mount; UC211-32 Insert Part; Cast Iron Housing Material |