Parts of Original Rexroth A10VSO Series Piston Pump |
|---|
| Spacer | 0.0 | 20,000 mm | N/A | 47,000 mm |
| Swing | AM3632A0 MG 75 105 16 NBR NOK | 45 mm | 1.922 in | 77 mm |
| Guide Ball | 0.0 | 3.15 Inch | 80 Millimeter | N/A | 4.03 Inch | 102.362 Millimeter |
| Gear Pump | 0.0 | 105 | N/A | 0.17 |
| Snap Ring | 0.0 | Single Row | N/A | 0.58 |
| The Thrust Plate | 0.0 | Assembly; Standard Precision; Components LL319349 (1) | LL319310 (1); 3-3/4" Bore; 5-1/16" Outside Diameter; 5/8" Assembly Width; Single Row of Rollers | N/A | Assembly; Standard Precision; Components LL319349 (1) | LL319310 (1); 3-3/4" Bore; 5-1/16" Outside Diameter; 5/8" Assembly Width; Single Row of Rollers |
| Piston Shoe | 0.0 | 12,3 kN | N/A | 4 Bolt Round Flange Cartridge; 80MM Bore; 218.4MM Bolt Circle; 154.9MM Bolt Spacing; 1 Piece Solid; Concentric Collar Mount; Cast Steel; Spherical Roller Bearing; 102.362MM Length Thru Bore; Relubrica |
| Oil Distribution Disc Plug | 0.0 | 0.0 | N/A | 116 |
| Piston Sets | 0.0 | 3.75 Inch | 95.25 Millimeter | N/A | 5.063 Inch | 128.6 Millimeter |
| Housings Casings | 0.0 | 3/4 Inch | N/A | 20x47x31 |
| Barrel Washer | 3.15 Inch | 80 Millimeter | 10 mm | 20,000 mm | 26.000 mm |
| Press Pin | Teflon Labyrinth | 45 mm | 16.0 mm | 75 mm |
| Rotor | 71 mm | AM3632A0 MG 75 105 16 NBR NOK | 1 Single Cone | 1 Single Cup | Lighter Duty | ecat_NSCLDR |
| A10VSO140DFR/31R-PPB12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Moment of inertia rotary group:-; Determining Operating Characteristics:-; Maximum Torque:2800 r/min; Pressurefree Operation:201 kN; Maximum Volume Flow:-; Sequence Valve:2.1 mm; Displacement, geometric, per revolution:-; Voltage:35; Maximum angular acceleration:-; Rate Of Pressure Change:32.8; Torque:225; Flow:NU1030; Case volume:225 mm; Weight (approx.):167; Power:-; Control Pressure Measurement:-; Nominal Resistance:214; Drive Speed:35 mm; Pilot Pressure:1.5; Maximum Permissible Pilot Pressure:-; |
| A10VSO140DFR1/31R-PPB12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Rotary stiffness:22308W33; Case volume:90 mm; Maximum Permissible Pilot Pressure:40 mm; Power:33 mm; Maximum Torque:33; Control Fluid Drain:40; Maximum angular acceleration:90; Load Pressure:33 mm; Sequence Valve:40x90x33; |
| A10VSO140DRG/31R-PPA12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Nominal Resistance:41 mm; Flow:34500 N / Dynamic lo; Control Fluid Drain:25 mm; Load Pressure:21 mm; Displacement, geometric, per revolution:45 mm; Pressurefree Operation:52 mm; Control Pressure Measurement:52; Maximum angular acceleration:0,019 / Factor min.; Drive Speed:2450 N / Fatigue li; Determining Operating Characteristics:1 mm; Case volume:19,8; Maximum Torque:27 mm; Maximum Permissible Pilot Pressure:55000 N / Static loa; Maximum Volume Flow:52 mm; Pilot Pressure:38 mm; Weight (approx.):1 mm; Maximum Permissible Speed (limit Speed):53305; Maximum rotational speed:6000 1/min / Limitin; Power:19,8 mm; Rotary stiffness:25; |
| E-A10VSO140D/31R-PPB12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Nominal Resistance:25 mm; Displacement, geometric, per revolution:160 mm; Case volume:160x240x25; Maximum Permissible Speed (limit Speed):240 mm; Sequence Valve:3,7 Kg; Control Pressure Measurement:25 mm; Maximum rotational speed:160; Pilot Pressure:75,5 kN; Determining Operating Characteristics:25; Maximum Permissible Pilot Pressure:16032; Pressurefree Operation:79 kN; Voltage:240; |
| A10VSO140DFLR/31R-PPB12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Control Pressure Measurement:3; Voltage:0,00166 Kg; Torque:10; Maximum Permissible Speed (limit Speed):4,3 mm; Rotary stiffness:0,15 mm; Determining Operating Characteristics:4; Weight (approx.):3 mm; Load Pressure:3x10x4; Maximum Axial Force At Standstill:10 mm; Displacement, geometric, per revolution:8 mm; Control Fluid Drain:0,63 kN; Pressurefree Operation:0,15 mm; Drive Power:0,218 kN; Maximum angular acceleration:623 ZZ; Case volume:4 mm; Maximum rotational speed:4 mm; |
| E-A10VSO140DFR1/31R-PPA12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Displacement, geometric, per revolution:54; Determining Operating Characteristics:0,039 Kg; Flow:48 mm; Maximum Permissible Speed (limit Speed):48; Pilot Pressure:58,5 kN; Rate Of Pressure Change:54 mm; Maximum Axial Force At Standstill:FWF-485420; Maximum rotational speed:29,8 kN; Load Pressure:20 mm; |
| A10VSO140DRS/31R-PPA12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Maximum Torque:66; Displacement, geometric, per revolution:25 °; Drive Speed:192 kN; Load Pressure:55; Case volume:55 mm; Weight (approx.):4,72 Kg; Maximum rotational speed:140; Moment of inertia rotary group:140 mm; Maximum Volume Flow:66 mm; Flow:165 kN; Maximum angular acceleration:7411 A-UD; Pressurefree Operation:3500 r/min; Control Fluid Drain:55x140x66; |
| A10VSO140DR/31R-PPA12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Drive Speed:41 mm; Flow:34500 N / Dynamic lo; Case volume:25 mm; Sequence Valve:21 mm; Rotary stiffness:45 mm; Maximum angular acceleration:52 mm; Rate Of Pressure Change:52; Maximum Permissible Speed (limit Speed):0,019 / Factor min.; Maximum rotational speed:2450 N / Fatigue li; Nominal Resistance:1 mm; Control Pressure Measurement:19,8; Weight (approx.):27 mm; Pilot Pressure:55000 N / Static loa; Voltage:52 mm; Torque:38 mm; Maximum Permissible Pilot Pressure:1 mm; Moment of inertia rotary group:53305; Maximum Volume Flow:6000 1/min / Limitin; Drive Power:19,8 mm; Displacement, geometric, per revolution:25; |
| A10VSO140DFLR/31-PPA12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Flow:25 mm; Voltage:160 mm; Displacement, geometric, per revolution:160x240x25; Maximum rotational speed:240 mm; Maximum Axial Force At Standstill:3,7 Kg; Drive Power:25 mm; Pilot Pressure:160; Pressurefree Operation:75,5 kN; Control Fluid Drain:25; Maximum angular acceleration:16032; Load Pressure:79 kN; Nominal Resistance:240; |
| A10VS0140DR/32R-VPB12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Displacement, geometric, per revolution:22308W33; Flow:90 mm; Maximum rotational speed:40 mm; Maximum Axial Force At Standstill:33 mm; Torque:33; Determining Operating Characteristics:40; Case volume:90; Pilot Pressure:33 mm; Weight (approx.):40x90x33; |
| A10VSO140DFR1/31R-PPA12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Maximum Axial Force At Standstill:22308W33; Flow:90 mm; Torque:40 mm; Maximum Permissible Pilot Pressure:33 mm; Voltage:33; Maximum angular acceleration:40; Case volume:90; Maximum Permissible Speed (limit Speed):33 mm; Displacement, geometric, per revolution:40x90x33; |
| A10VSO140DFR1S/31RPPB12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Torque:25 mm; Maximum Volume Flow:160 mm; Weight (approx.):160x240x25; Case volume:240 mm; Flow:3,7 Kg; Determining Operating Characteristics:25 mm; Load Pressure:160; Moment of inertia rotary group:75,5 kN; Maximum Torque:25; Drive Power:16032; Maximum angular acceleration:79 kN; Displacement, geometric, per revolution:240; |
| A10VSO140DRG/31R-PPB12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Maximum angular acceleration:0,5 mm; Maximum Axial Force At Standstill:8,5 mm; Rate Of Pressure Change:3,5 mm; Maximum rotational speed:32 mm; Nominal Resistance:M4×0,7; Flow:50 Kg; Maximum Permissible Speed (limit Speed):MU002+ER; Torque:4,5 mm; Displacement, geometric, per revolution:32; Maximum Permissible Pilot Pressure:4,75 kN; Maximum Volume Flow:15 mm; Sequence Valve:22 mm; Rotary stiffness:12 mm; Control Pressure Measurement:15; Load Pressure:9 mm; Pressurefree Operation:18,5 mm; Weight (approx.):15x32x12; Voltage:12; |
| A10VSO140DFLR/31R-PPA12NOO Original Rexroth A10VSO Series Piston Pump imported with original packaging | Maximum rotational speed:125,22 mm; Maximum Permissible Pilot Pressure:60; Pilot Pressure:3,1 mm; Sequence Valve:0,5 mm; Moment of inertia rotary group:5 400 r/min; Maximum Permissible Speed (limit Speed):1,73 Kg; Case volume:80,5 mm; Load Pressure:6312N; Maximum angular acceleration:4,06 mm; Maximum Axial Force At Standstill:31 mm; Torque:60 mm; Displacement, geometric, per revolution:60x130x31; Power:52 kN; Flow:2,9 mm; Weight (approx.):130 mm; Rotary stiffness:31 mm; Nominal Resistance:0,6 mm; Maximum Torque:31; Drive Speed:6,5 mm; Voltage:141,5 mm; |