Parts of Original Rexroth A10VSO Series Piston Pump | ||||||||
---|---|---|---|---|---|---|---|---|
Valve Plates | 35 mm | 20 mm | KDX090 | 1.1875 in | ||||
Swash Plate Assy | 20 mm | 14 | 41 | 0,012 Kg | ||||
Piston Sets | 7.874 Inch | 200 Millimeter | 4.331 Inch | 110 Millimeter | 2.087 Inch | 53 Millimeter | 7.25 | ||||
Back Plate | NBR | 34 mm | 4.4375 in | 0.01 | ||||
The Ball Hinge Spring | 7.5 Inch | 190.5 Millimeter | 4 Inch | 101.6 Millimeter | Bearings with Housings | 14.81 | ||||
Block Cylinder | 4.65 kN | Set Screw | 140 | 4.5 Inch | 114.3 Millimeter | ||||
Inclined Plate | 2.5000 in | 0.7500 in | 3.3906 in | 3800 r/min | ||||
Separator | 3.5625 in | 1.1875 in | 4.4375 in | Two-Bolt Base | ||||
Valve Plate | 240 | 140 | 80 | 41 | ||||
Cylinder | Available | 0 Inch | 0 Millimeter | http://www.timken.com | Felt Seal | ||||
Seal Kit For Hyd Pump | 254 mm | 228,6 mm | 12,7 mm | Lubrication Fitting | ||||
Pump Right Rotating Group | 0.013 kg | Standard Duty | Flange Type | 9500 r/min |
A10VS0140DR/32R-VPB12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Case volume:7,92; Maximum Torque:14,288; Maximum Volume Flow:M-651; Control Fluid Drain:14,288 mm; Maximum angular acceleration:0,0045 Kg; Sequence Valve:4,3 kN; Displacement, geometric, per revolution:2 mm; Pressurefree Operation:9,525 mm; Power:9.525x14.288x7.92; Drive Speed:7,92 mm; Drive Power:9,525; |
A10VSO140DR/31R-PPA12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Maximum rotational speed:22308W33; Displacement, geometric, per revolution:90 mm; Maximum angular acceleration:40 mm; Control Pressure Measurement:33 mm; Case volume:33; Sequence Valve:40; Pressurefree Operation:90; Weight (approx.):33 mm; Flow:40x90x33; |
A10VSO140DFLR/31R-PPB12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Voltage:100 mm; Case volume:25,2 kN; Nominal Resistance:18; Drive Power:65 mm; Control Pressure Measurement:6600 r/min; Moment of inertia rotary group:18 mm; Determining Operating Characteristics:93,5 mm; Power:100; Maximum Permissible Speed (limit Speed):30,5 kN; Maximum Volume Flow:65; Flow:18 mm; Pressurefree Operation:6013-2RU; Maximum rotational speed:65x100x18; Pilot Pressure:0,435 Kg; Load Pressure:1 mm; Maximum Torque:74,5 mm; Maximum angular acceleration:71,5 mm; Displacement, geometric, per revolution:1,1 mm; |
A10VSO140DRG/31R-PPA12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Pressurefree Operation:1.1; Voltage:83.5; Control Fluid Drain:83,5 mm; Case volume:101 kN; Maximum rotational speed:90 mm; Pilot Pressure:0,618 Kg; Rate Of Pressure Change:90; Maximum Permissible Speed (limit Speed):-; Nominal Resistance:82 mm; Determining Operating Characteristics:8200; Maximum Axial Force At Standstill:61,5 mm; Weight (approx.):61.5; Moment of inertia rotary group:26 mm; Sequence Valve:26; Rotary stiffness:26 mm; Load Pressure:NN3011K; Torque:6800; Maximum Torque:6800 r/min; Drive Speed:82; Drive Power:0.618; |
A10VSO140DRS/31R-PPA12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Maximum Torque:54; Maximum Permissible Pilot Pressure:0,039 Kg; Displacement, geometric, per revolution:48 mm; Control Pressure Measurement:48; Power:58,5 kN; Sequence Valve:54 mm; Weight (approx.):FWF-485420; Pressurefree Operation:29,8 kN; Nominal Resistance:20 mm; |
A10VSO140DFR1/31R-PPA12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Drive Speed:41 mm; Maximum Torque:34500 N / Dynamic lo; Nominal Resistance:25 mm; Load Pressure:21 mm; Maximum Permissible Speed (limit Speed):45 mm; Maximum rotational speed:52 mm; Flow:52; Rate Of Pressure Change:0,019 / Factor min.; Torque:2450 N / Fatigue li; Drive Power:1 mm; Maximum Volume Flow:19,8; Pilot Pressure:27 mm; Moment of inertia rotary group:55000 N / Static loa; Determining Operating Characteristics:52 mm; Sequence Valve:38 mm; Maximum Permissible Pilot Pressure:1 mm; Weight (approx.):53305; Maximum Axial Force At Standstill:6000 1/min / Limitin; Displacement, geometric, per revolution:19,8 mm; Maximum angular acceleration:25; |
A10VSO140DFLR/31R-PPA12NOO Original Rexroth A10VSO Series Piston Pump imported with original packaging | Maximum angular acceleration:66; Control Fluid Drain:25 °; Weight (approx.):192 kN; Power:55; Maximum Volume Flow:55 mm; Pilot Pressure:4,72 Kg; Drive Power:140; Torque:140 mm; Moment of inertia rotary group:66 mm; Drive Speed:165 kN; Rotary stiffness:7411 A-UD; Load Pressure:3500 r/min; Control Pressure Measurement:55x140x66; |
A10VSO140DRG/31R-PPB12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Pilot Pressure:41 mm; Maximum Axial Force At Standstill:34500 N / Dynamic lo; Displacement, geometric, per revolution:25 mm; Maximum Torque:21 mm; Maximum Permissible Pilot Pressure:45 mm; Nominal Resistance:52 mm; Weight (approx.):52; Sequence Valve:0,019 / Factor min.; Load Pressure:2450 N / Fatigue li; Drive Speed:1 mm; Drive Power:19,8; Rate Of Pressure Change:27 mm; Torque:55000 N / Static loa; Control Fluid Drain:52 mm; Maximum Volume Flow:38 mm; Case volume:1 mm; Voltage:53305; Determining Operating Characteristics:6000 1/min / Limitin; Control Pressure Measurement:19,8 mm; Maximum angular acceleration:25; |
A10VSO140DFR1S/31RPPB12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Sequence Valve:7,92; Nominal Resistance:14,288; Load Pressure:M-651; Weight (approx.):14,288 mm; Flow:0,0045 Kg; Rate Of Pressure Change:4,3 kN; Pilot Pressure:2 mm; Maximum Torque:9,525 mm; Maximum Permissible Pilot Pressure:9.525x14.288x7.92; Maximum angular acceleration:7,92 mm; Control Pressure Measurement:9,525; |
E-A10VSO140DFR1/31R-PPA12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Maximum rotational speed:0,5 mm; Maximum angular acceleration:8,5 mm; Case volume:3,5 mm; Load Pressure:32 mm; Flow:M4×0,7; Rate Of Pressure Change:50 Kg; Maximum Torque:MU002+ER; Maximum Permissible Pilot Pressure:4,5 mm; Pilot Pressure:32; Maximum Permissible Speed (limit Speed):4,75 kN; Power:15 mm; Drive Speed:22 mm; Maximum Axial Force At Standstill:12 mm; Displacement, geometric, per revolution:15; Sequence Valve:9 mm; Rotary stiffness:18,5 mm; Weight (approx.):15x32x12; Control Pressure Measurement:12; |
A10VSO140DFR1/31R-PPB12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Drive Speed:100 mm; Control Pressure Measurement:25,2 kN; Case volume:18; Weight (approx.):65 mm; Drive Power:6600 r/min; Control Fluid Drain:18 mm; Maximum Axial Force At Standstill:93,5 mm; Rotary stiffness:100; Maximum Permissible Speed (limit Speed):30,5 kN; Maximum Volume Flow:65; Sequence Valve:18 mm; Maximum angular acceleration:6013-2RU; Load Pressure:65x100x18; Power:0,435 Kg; Flow:1 mm; Pressurefree Operation:74,5 mm; Rate Of Pressure Change:71,5 mm; Pilot Pressure:1,1 mm; |
A10VSO140DFR/31R-PPB12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Pressurefree Operation:0,5 mm; Maximum rotational speed:8,5 mm; Pilot Pressure:3,5 mm; Determining Operating Characteristics:32 mm; Rotary stiffness:M4×0,7; Weight (approx.):50 Kg; Rate Of Pressure Change:MU002+ER; Displacement, geometric, per revolution:4,5 mm; Maximum Permissible Speed (limit Speed):32; Sequence Valve:4,75 kN; Maximum Volume Flow:15 mm; Load Pressure:22 mm; Power:12 mm; Moment of inertia rotary group:15; Drive Speed:9 mm; Maximum Axial Force At Standstill:18,5 mm; Torque:15x32x12; Maximum Permissible Pilot Pressure:12; |
E-A10VSO140D/31R-PPB12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Rotary stiffness:7,92; Maximum angular acceleration:14,288; Drive Speed:M-651; Weight (approx.):14,288 mm; Case volume:0,0045 Kg; Pilot Pressure:4,3 kN; Maximum Permissible Speed (limit Speed):2 mm; Control Fluid Drain:9,525 mm; Maximum rotational speed:9.525x14.288x7.92; Maximum Volume Flow:7,92 mm; Rate Of Pressure Change:9,525; |
A10VSO140DFLR/31-PPA12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Determining Operating Characteristics:-; Nominal Resistance:-; Drive Power:2800 r/min; Pilot Pressure:201 kN; Maximum Permissible Speed (limit Speed):-; Maximum Axial Force At Standstill:2.1 mm; Control Pressure Measurement:-; Sequence Valve:35; Maximum Volume Flow:-; Rotary stiffness:32.8; Maximum angular acceleration:225; Moment of inertia rotary group:NU1030; Case volume:225 mm; Flow:167; Maximum Torque:-; Torque:-; Maximum Permissible Pilot Pressure:214; Voltage:35 mm; Weight (approx.):1.5; Drive Speed:-; |