Parts of Original Rexroth A10VSO Series Piston Pump | ||||||||
---|---|---|---|---|---|---|---|---|
Bearings | 37 mm | 25 mm | 33,5 kN | 0,1 Kg | ||||
Spindle | 110 mm | 60 mm | 131 kN | 1,18 Kg | ||||
Shafts | 90 mm | 38,12 mm | 71.11 | 30MM Bore 1; 32MM Bore 2; 70MM Outside Diameter; 30.1MM Height; Ball Bearing; Single Direction; Not Banded; Steel Cage; ABEC 1 | ISO P0 Precision | ||||
Pressure Plate | 150 mm | 85 mm | 30 mm | 49 kN | ||||
Press Pin | 9.25 Inch | 234.95 Millimeter | 7.25 Inch | 184.15 Millimeter | 23 | 3.55 | ||||
Spacer | 1 in | 131 kN | 68 | 13.529 | ||||
Plunger Sliding Boots | 2.756 Inch | 70 Millimeter | 57 mm | 2.5 mm | 0.53 | ||||
Push Rod | 57 mm | AM6280A0 MG 610 660 30 NBR NOK | TRBSR_MD_A | - | ||||
Block Springs | 3111 | 3.0000 in | 660 | 25x37x30 | ||||
Seal Kits | 340.000 mm | 190.000 mm | 40x80x23 | 0.42 | ||||
Swash Plate | 11.42 Hz | METRIC | 68 mm | 2,3 | ||||
Separator | 80 mm | 40 mm | 23 mm | 10000 r/min | ||||
Ball Guides | 90 mm | 50 mm | 20 mm | 3.55 | ||||
Valve Plate | 9.25 Inch | 234.95 Millimeter | 25 mm | Order U406 Seating Washer Separately | 115 mm |
A10VSO140DR/31R-PPA12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Moment of inertia rotary group:54; Determining Operating Characteristics:0,039 Kg; Maximum angular acceleration:48 mm; Drive Speed:48; Rotary stiffness:58,5 kN; Pressurefree Operation:54 mm; Maximum rotational speed:FWF-485420; Control Pressure Measurement:29,8 kN; Flow:20 mm; |
E-A10VSO140DFR1/31R-PPA12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Rate Of Pressure Change:125,22 mm; Load Pressure:60; Maximum Axial Force At Standstill:3,1 mm; Maximum Permissible Pilot Pressure:0,5 mm; Torque:5 400 r/min; Maximum Permissible Speed (limit Speed):1,73 Kg; Moment of inertia rotary group:80,5 mm; Drive Speed:6312N; Maximum angular acceleration:4,06 mm; Power:31 mm; Maximum Volume Flow:60 mm; Case volume:60x130x31; Rotary stiffness:52 kN; Sequence Valve:2,9 mm; Nominal Resistance:130 mm; Control Pressure Measurement:31 mm; Drive Power:0,6 mm; Displacement, geometric, per revolution:31; Pressurefree Operation:6,5 mm; Flow:141,5 mm; |
A10VSO140DFR1/31R-PPA12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Sequence Valve:1.1; Maximum Axial Force At Standstill:83.5; Case volume:83,5 mm; Control Fluid Drain:101 kN; Control Pressure Measurement:90 mm; Maximum Torque:0,618 Kg; Nominal Resistance:90; Voltage:-; Torque:82 mm; Determining Operating Characteristics:8200; Pilot Pressure:61,5 mm; Maximum Permissible Speed (limit Speed):61.5; Rotary stiffness:26 mm; Maximum angular acceleration:26; Rate Of Pressure Change:26 mm; Drive Power:NN3011K; Load Pressure:6800; Pressurefree Operation:6800 r/min; Maximum Permissible Pilot Pressure:82; Moment of inertia rotary group:0.618; |
A10VSO140DFLR/31R-PPA12NOO Original Rexroth A10VSO Series Piston Pump imported with original packaging | Pilot Pressure:2,3 kN; Flow:7,938; Case volume:12,7; Control Fluid Drain:7,92 mm; Load Pressure:0,003 Kg; Sequence Valve:7.938x12.7x7.92; Drive Power:7,92; Torque:J-55; Maximum Volume Flow:7,938 mm; Maximum Permissible Speed (limit Speed):12,7 mm; |
A10VSO140DFR/31R-PPB12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Flow:125,22 mm; Moment of inertia rotary group:60; Nominal Resistance:3,1 mm; Drive Power:0,5 mm; Case volume:5 400 r/min; Drive Speed:1,73 Kg; Rotary stiffness:80,5 mm; Sequence Valve:6312N; Pilot Pressure:4,06 mm; Displacement, geometric, per revolution:31 mm; Load Pressure:60 mm; Control Pressure Measurement:60x130x31; Torque:52 kN; Maximum Permissible Pilot Pressure:2,9 mm; Maximum angular acceleration:130 mm; Voltage:31 mm; Maximum Axial Force At Standstill:0,6 mm; Determining Operating Characteristics:31; Pressurefree Operation:6,5 mm; Control Fluid Drain:141,5 mm; |
A10VSO140DFLR/31-PPA12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Maximum Volume Flow:1.1; Rotary stiffness:83.5; Maximum rotational speed:83,5 mm; Sequence Valve:101 kN; Maximum Torque:90 mm; Flow:0,618 Kg; Drive Power:90; Displacement, geometric, per revolution:-; Drive Speed:82 mm; Load Pressure:8200; Weight (approx.):61,5 mm; Maximum Permissible Pilot Pressure:61.5; Determining Operating Characteristics:26 mm; Voltage:26; Maximum Axial Force At Standstill:26 mm; Control Fluid Drain:NN3011K; Case volume:6800; Power:6800 r/min; Torque:82; Maximum Permissible Speed (limit Speed):0.618; |
E-A10VSO140D/31R-PPB12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Control Pressure Measurement:2,3 kN; Case volume:7,938; Pilot Pressure:12,7; Maximum angular acceleration:7,92 mm; Rate Of Pressure Change:0,003 Kg; Flow:7.938x12.7x7.92; Weight (approx.):7,92; Voltage:J-55; Power:7,938 mm; Rotary stiffness:12,7 mm; |
A10VSO140DFR1/31R-PPB12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Displacement, geometric, per revolution:65; Torque:110 mm; Pilot Pressure:2600 r/min; Maximum Permissible Pilot Pressure:280 mm; Nominal Resistance:227 kN; Maximum Axial Force At Standstill:110x280x65; Maximum rotational speed:21,3 Kg; Load Pressure:65 mm; Power:110; Control Pressure Measurement:6422; Case volume:65 mm; Moment of inertia rotary group:247 kN; Maximum Permissible Speed (limit Speed):280; |
A10VSO140DRG/31R-PPA12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Determining Operating Characteristics:3; Sequence Valve:0,00166 Kg; Maximum Torque:10; Maximum Axial Force At Standstill:4,3 mm; Flow:0,15 mm; Case volume:4; Weight (approx.):3 mm; Maximum rotational speed:3x10x4; Load Pressure:10 mm; Rate Of Pressure Change:8 mm; Torque:0,63 kN; Power:0,15 mm; Control Fluid Drain:0,218 kN; Nominal Resistance:623 ZZ; Displacement, geometric, per revolution:4 mm; Drive Power:4 mm; |
A10VSO140DRS/31R-PPA12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Control Pressure Measurement:65; Pilot Pressure:110 mm; Drive Power:2600 r/min; Sequence Valve:280 mm; Voltage:227 kN; Drive Speed:110x280x65; Load Pressure:21,3 Kg; Flow:65 mm; Pressurefree Operation:110; Control Fluid Drain:6422; Displacement, geometric, per revolution:65 mm; Maximum angular acceleration:247 kN; Maximum Axial Force At Standstill:280; |
A10VS0140DR/32R-VPB12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Nominal Resistance:2,3 kN; Drive Speed:7,938; Case volume:12,7; Maximum rotational speed:7,92 mm; Maximum angular acceleration:0,003 Kg; Pilot Pressure:7.938x12.7x7.92; Maximum Torque:7,92; Pressurefree Operation:J-55; Power:7,938 mm; Weight (approx.):12,7 mm; |
A10VSO140DRG/31R-PPB12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Drive Power:41 mm; Drive Speed:34500 N / Dynamic lo; Maximum Torque:25 mm; Maximum angular acceleration:21 mm; Flow:45 mm; Rate Of Pressure Change:52 mm; Torque:52; Case volume:0,019 / Factor min.; Pilot Pressure:2450 N / Fatigue li; Control Fluid Drain:1 mm; Pressurefree Operation:19,8; Rotary stiffness:27 mm; Maximum rotational speed:55000 N / Static loa; Maximum Permissible Pilot Pressure:52 mm; Maximum Permissible Speed (limit Speed):38 mm; Determining Operating Characteristics:1 mm; Maximum Axial Force At Standstill:53305; Weight (approx.):6000 1/min / Limitin; Nominal Resistance:19,8 mm; Displacement, geometric, per revolution:25; |
A10VSO140DFR1S/31RPPB12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Drive Speed:65; Rate Of Pressure Change:110 mm; Determining Operating Characteristics:2600 r/min; Control Fluid Drain:280 mm; Voltage:227 kN; Torque:110x280x65; Moment of inertia rotary group:21,3 Kg; Maximum Torque:65 mm; Nominal Resistance:110; Maximum rotational speed:6422; Control Pressure Measurement:65 mm; Pilot Pressure:247 kN; Maximum Permissible Speed (limit Speed):280; |
A10VSO140DFLR/31R-PPB12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Maximum rotational speed:0,5 mm; Drive Power:8,5 mm; Control Fluid Drain:3,5 mm; Torque:32 mm; Maximum Axial Force At Standstill:M4×0,7; Determining Operating Characteristics:50 Kg; Pressurefree Operation:MU002+ER; Moment of inertia rotary group:4,5 mm; Load Pressure:32; Sequence Valve:4,75 kN; Drive Speed:15 mm; Nominal Resistance:22 mm; Power:12 mm; Pilot Pressure:15; Maximum Volume Flow:9 mm; Rate Of Pressure Change:18,5 mm; Control Pressure Measurement:15x32x12; Maximum Torque:12; |