Parts of Original Rexroth A10VSO Series Piston Pump | ||||||||
---|---|---|---|---|---|---|---|---|
Saddle Bearing | 90 mm | 72 | 90,25 kN | 0.0 | ||||
Gear Pump | 170 mm | 110 mm | 173 kN | 28 mm | ||||
Ball Guide | 36.5 mm | 23.81 mm | 14 kN | 34 mm | ||||
Spacer | 7.48 Inch | 190 Millimeter | 5.512 Inch | 140 Millimeter | 12 mm | 1.969 Inch | 50 Millimeter | ||||
The Thrust Plate | 64 mm | 3.0 mm | 19.9 | 79.0 mm | ||||
Plunger Sliding Boots | 3.625 Inch | 92.075 Millimeter | 2.75 Inch | 69.85 Millimeter | 58 mm | 3.125 Inch | 79.38 Millimeter | ||||
Set Plate | 0.7500 in | 0.2500 in | 2 mm | 0.2813 in | ||||
Swing | 120 mm | 65 mm | 38.1 mm | 38.1 mm | ||||
Cylinder Block | 325 mm | 111.5 mm | 64 mm | 77 mm | ||||
Shafts | 100 mm | 65 mm | Yes | 4600 r/min | ||||
Oil Distribution Disc Plug | 130 mm | 60 mm | 31 mm | 31 mm | ||||
Drive Shaft | 1 mm | NNU-4928 MS P/5 | 36 mm | 4,600 rpm | ||||
Variable Piston | 62 mm | 40 mm | 12 mm | 12 mm |
A10VSO140DR/31R-PPA12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Pilot Pressure:2,3 kN; Maximum Axial Force At Standstill:7,938; Drive Power:12,7; Pressurefree Operation:7,92 mm; Displacement, geometric, per revolution:0,003 Kg; Rotary stiffness:7.938x12.7x7.92; Maximum Permissible Pilot Pressure:7,92; Drive Speed:J-55; Weight (approx.):7,938 mm; Maximum rotational speed:12,7 mm; |
A10VSO140DFR/31R-PPB12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Pilot Pressure:66; Maximum Permissible Speed (limit Speed):25 °; Flow:192 kN; Maximum rotational speed:55; Control Pressure Measurement:55 mm; Control Fluid Drain:4,72 Kg; Maximum Permissible Pilot Pressure:140; Displacement, geometric, per revolution:140 mm; Maximum Axial Force At Standstill:66 mm; Rate Of Pressure Change:165 kN; Sequence Valve:7411 A-UD; Case volume:3500 r/min; Rotary stiffness:55x140x66; |
A10VSO140DRG/31R-PPA12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Drive Power:0,5 mm; Maximum Volume Flow:8,5 mm; Torque:3,5 mm; Flow:32 mm; Control Fluid Drain:M4×0,7; Determining Operating Characteristics:50 Kg; Load Pressure:MU002+ER; Moment of inertia rotary group:4,5 mm; Maximum Permissible Pilot Pressure:32; Nominal Resistance:4,75 kN; Pressurefree Operation:15 mm; Maximum angular acceleration:22 mm; Voltage:12 mm; Rate Of Pressure Change:15; Displacement, geometric, per revolution:9 mm; Case volume:18,5 mm; Weight (approx.):15x32x12; Power:12; |
A10VS0140DR/32R-VPB12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Rotary stiffness:125,22 mm; Maximum Volume Flow:60; Case volume:3,1 mm; Control Pressure Measurement:0,5 mm; Nominal Resistance:5 400 r/min; Sequence Valve:1,73 Kg; Control Fluid Drain:80,5 mm; Weight (approx.):6312N; Moment of inertia rotary group:4,06 mm; Maximum Permissible Pilot Pressure:31 mm; Flow:60 mm; Pilot Pressure:60x130x31; Maximum angular acceleration:52 kN; Determining Operating Characteristics:2,9 mm; Maximum Permissible Speed (limit Speed):130 mm; Maximum Axial Force At Standstill:31 mm; Load Pressure:0,6 mm; Rate Of Pressure Change:31; Torque:6,5 mm; Drive Power:141,5 mm; |
A10VSO140DFR1/31R-PPB12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Maximum Axial Force At Standstill:100 mm; Maximum Torque:25,2 kN; Maximum Permissible Pilot Pressure:18; Power:65 mm; Maximum angular acceleration:6600 r/min; Control Pressure Measurement:18 mm; Maximum Permissible Speed (limit Speed):93,5 mm; Rotary stiffness:100; Maximum Volume Flow:30,5 kN; Drive Speed:65; Displacement, geometric, per revolution:18 mm; Determining Operating Characteristics:6013-2RU; Load Pressure:65x100x18; Nominal Resistance:0,435 Kg; Drive Power:1 mm; Maximum rotational speed:74,5 mm; Sequence Valve:71,5 mm; Torque:1,1 mm; |
A10VSO140DFLR/31-PPA12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Power:0,5 mm; Maximum rotational speed:8,5 mm; Nominal Resistance:3,5 mm; Control Pressure Measurement:32 mm; Maximum Axial Force At Standstill:M4×0,7; Flow:50 Kg; Rotary stiffness:MU002+ER; Drive Power:4,5 mm; Load Pressure:32; Maximum Volume Flow:4,75 kN; Drive Speed:15 mm; Maximum Permissible Speed (limit Speed):22 mm; Pressurefree Operation:12 mm; Sequence Valve:15; Voltage:9 mm; Torque:18,5 mm; Pilot Pressure:15x32x12; Maximum Permissible Pilot Pressure:12; |
E-A10VSO140DFR1/31R-PPA12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Maximum angular acceleration:7,92; Sequence Valve:14,288; Maximum Axial Force At Standstill:M-651; Pressurefree Operation:14,288 mm; Control Pressure Measurement:0,0045 Kg; Rotary stiffness:4,3 kN; Load Pressure:2 mm; Control Fluid Drain:9,525 mm; Maximum rotational speed:9.525x14.288x7.92; Drive Speed:7,92 mm; Maximum Permissible Speed (limit Speed):9,525; |
A10VSO140DFR1/31R-PPA12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Maximum Permissible Pilot Pressure:54; Moment of inertia rotary group:0,039 Kg; Flow:48 mm; Sequence Valve:48; Maximum angular acceleration:58,5 kN; Pilot Pressure:54 mm; Control Pressure Measurement:FWF-485420; Maximum rotational speed:29,8 kN; Torque:20 mm; |
A10VSO140DRG/31R-PPB12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Maximum Permissible Pilot Pressure:65; Rate Of Pressure Change:110 mm; Rotary stiffness:2600 r/min; Control Pressure Measurement:280 mm; Maximum Volume Flow:227 kN; Pressurefree Operation:110x280x65; Moment of inertia rotary group:21,3 Kg; Sequence Valve:65 mm; Torque:110; Drive Power:6422; Maximum Torque:65 mm; Power:247 kN; Nominal Resistance:280; |
A10VSO140DFR1S/31RPPB12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Rotary stiffness:22308W33; Nominal Resistance:90 mm; Maximum Permissible Pilot Pressure:40 mm; Drive Speed:33 mm; Flow:33; Rate Of Pressure Change:40; Maximum Axial Force At Standstill:90; Pilot Pressure:33 mm; Voltage:40x90x33; |
E-A10VSO140D/31R-PPB12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Moment of inertia rotary group:0,5 mm; Pressurefree Operation:8,5 mm; Rate Of Pressure Change:3,5 mm; Sequence Valve:32 mm; Voltage:M4×0,7; Maximum Permissible Pilot Pressure:50 Kg; Maximum rotational speed:MU002+ER; Drive Power:4,5 mm; Weight (approx.):32; Control Fluid Drain:4,75 kN; Displacement, geometric, per revolution:15 mm; Rotary stiffness:22 mm; Maximum angular acceleration:12 mm; Maximum Permissible Speed (limit Speed):15; Nominal Resistance:9 mm; Pilot Pressure:18,5 mm; Determining Operating Characteristics:15x32x12; Maximum Axial Force At Standstill:12; |
A10VSO140DRS/31R-PPA12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Case volume:100 mm; Sequence Valve:25,2 kN; Moment of inertia rotary group:18; Displacement, geometric, per revolution:65 mm; Maximum Axial Force At Standstill:6600 r/min; Flow:18 mm; Maximum Volume Flow:93,5 mm; Maximum rotational speed:100; Determining Operating Characteristics:30,5 kN; Drive Power:65; Rate Of Pressure Change:18 mm; Control Pressure Measurement:6013-2RU; Torque:65x100x18; Maximum Permissible Pilot Pressure:0,435 Kg; Maximum Permissible Speed (limit Speed):1 mm; Control Fluid Drain:74,5 mm; Rotary stiffness:71,5 mm; Nominal Resistance:1,1 mm; |
A10VSO140DFLR/31R-PPA12NOO Original Rexroth A10VSO Series Piston Pump imported with original packaging | Voltage:3; Rotary stiffness:0,00166 Kg; Load Pressure:10; Control Pressure Measurement:4,3 mm; Case volume:0,15 mm; Control Fluid Drain:4; Weight (approx.):3 mm; Nominal Resistance:3x10x4; Determining Operating Characteristics:10 mm; Maximum rotational speed:8 mm; Maximum Torque:0,63 kN; Moment of inertia rotary group:0,15 mm; Maximum Volume Flow:0,218 kN; Maximum Permissible Speed (limit Speed):623 ZZ; Rate Of Pressure Change:4 mm; Torque:4 mm; |
A10VSO140DFLR/31R-PPB12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Voltage:-; Displacement, geometric, per revolution:-; Maximum angular acceleration:2800 r/min; Maximum Axial Force At Standstill:201 kN; Control Fluid Drain:-; Case volume:2.1 mm; Maximum Torque:-; Rate Of Pressure Change:35; Rotary stiffness:-; Weight (approx.):32.8; Load Pressure:225; Flow:NU1030; Drive Speed:225 mm; Control Pressure Measurement:167; Determining Operating Characteristics:-; Pressurefree Operation:-; Sequence Valve:214; Power:35 mm; Maximum Permissible Speed (limit Speed):1.5; Maximum Volume Flow:-; |