Parts of Original Rexroth A10VSO Series Piston Pump | ||||||||
---|---|---|---|---|---|---|---|---|
Back Plate | 101,6 mm | 215,9 mm | 480 | http://www.qmbearings.com | ||||
Piston Sets | 60 mm | 90 mm | 1,15 Kg | 0,8 kN | ||||
Central Shaft | 3.5 Inch | 88.9 Millimeter | 4.49 Inch | 114.046 Millimeter | 19.068 | 0.0 | ||||
Spacer | 0.591 Inch | 15 Millimeter | 1.22 Inch | 31 Millimeter | 0.63 | 0.0 | ||||
Rod | 3.937 Inch | 100 Millimeter | 7.087 Inch | 180 Millimeter | 4.77 | 0.0 | ||||
Skeleton Oil Seal | 2.165 Inch | 55 Millimeter | 4.724 Inch | 120 Millimeter | 2.386 | 0.0 | ||||
Press Pin | Single Row | 600 r/min | 0.663 | 0.0 | ||||
Bearing Plate | 8482.50.00.00 | 197 mm | 0.078 | 0.0 | ||||
Plunger Sliding Boots | V Lock | 245 kN | - | 0.0 | ||||
Piston Shoe | 1.9375 in | 8482.50.00.00 | 1,56 kN | 1-9/64 in | ||||
Gear Pump | 460 mm | 560 mm | High Capacity | Plain Inner Ring | 2 Rib Outer Ring | Light Wide Series | Cage on Outer Ring ID | 68 mm | ||||
Swash Plate | 15 mm | 24 mm | 197 | 0,8 kN | ||||
Set Plate | 25 mm | 62 mm | 8483.20.40.40 | 101,6 | ||||
Oil Distribution Plate | 1,15 Kg | QVVFY19V308SEN | 19.068 | 0,8 kN |
A10VSO140DRG/31R-PPA12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Maximum angular acceleration:41 mm; Voltage:34500 N / Dynamic lo; Pressurefree Operation:25 mm; Maximum Permissible Pilot Pressure:21 mm; Control Pressure Measurement:45 mm; Rotary stiffness:52 mm; Torque:52; Power:0,019 / Factor min.; Sequence Valve:2450 N / Fatigue li; Load Pressure:1 mm; Maximum Axial Force At Standstill:19,8; Weight (approx.):27 mm; Maximum Volume Flow:55000 N / Static loa; Determining Operating Characteristics:52 mm; Maximum Permissible Speed (limit Speed):38 mm; Flow:1 mm; Rate Of Pressure Change:53305; Case volume:6000 1/min / Limitin; Drive Power:19,8 mm; Moment of inertia rotary group:25; |
A10VSO140DFR1/31R-PPB12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Rate Of Pressure Change:65; Drive Power:110 mm; Weight (approx.):2600 r/min; Rotary stiffness:280 mm; Moment of inertia rotary group:227 kN; Maximum rotational speed:110x280x65; Voltage:21,3 Kg; Power:65 mm; Maximum Axial Force At Standstill:110; Nominal Resistance:6422; Drive Speed:65 mm; Maximum Permissible Pilot Pressure:247 kN; Displacement, geometric, per revolution:280; |
A10VSO140DRG/31R-PPB12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Determining Operating Characteristics:54; Sequence Valve:0,039 Kg; Rate Of Pressure Change:48 mm; Drive Speed:48; Maximum Axial Force At Standstill:58,5 kN; Maximum angular acceleration:54 mm; Voltage:FWF-485420; Rotary stiffness:29,8 kN; Torque:20 mm; |
E-A10VSO140DFR1/31R-PPA12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Displacement, geometric, per revolution:125,22 mm; Rotary stiffness:60; Pilot Pressure:3,1 mm; Maximum angular acceleration:0,5 mm; Moment of inertia rotary group:5 400 r/min; Maximum Volume Flow:1,73 Kg; Voltage:80,5 mm; Drive Speed:6312N; Load Pressure:4,06 mm; Sequence Valve:31 mm; Control Pressure Measurement:60 mm; Flow:60x130x31; Pressurefree Operation:52 kN; Weight (approx.):2,9 mm; Case volume:130 mm; Power:31 mm; Maximum Torque:0,6 mm; Nominal Resistance:31; Maximum Axial Force At Standstill:6,5 mm; Maximum Permissible Pilot Pressure:141,5 mm; |
A10VSO140DFLR/31R-PPA12NOO Original Rexroth A10VSO Series Piston Pump imported with original packaging | Torque:66; Nominal Resistance:25 °; Rate Of Pressure Change:192 kN; Maximum rotational speed:55; Moment of inertia rotary group:55 mm; Maximum angular acceleration:4,72 Kg; Rotary stiffness:140; Determining Operating Characteristics:140 mm; Pressurefree Operation:66 mm; Maximum Permissible Pilot Pressure:165 kN; Voltage:7411 A-UD; Power:3500 r/min; Control Fluid Drain:55x140x66; |
A10VSO140DFLR/31-PPA12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Weight (approx.):54; Displacement, geometric, per revolution:0,039 Kg; Maximum Axial Force At Standstill:48 mm; Power:48; Maximum Volume Flow:58,5 kN; Drive Speed:54 mm; Maximum angular acceleration:FWF-485420; Voltage:29,8 kN; Maximum rotational speed:20 mm; |
E-A10VSO140D/31R-PPB12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Control Pressure Measurement:22308W33; Drive Speed:90 mm; Determining Operating Characteristics:40 mm; Power:33 mm; Case volume:33; Voltage:40; Torque:90; Maximum Axial Force At Standstill:33 mm; Flow:40x90x33; |
A10VSO140DFLR/31R-PPB12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Pressurefree Operation:0,5 mm; Maximum Permissible Speed (limit Speed):8,5 mm; Maximum rotational speed:3,5 mm; Control Pressure Measurement:32 mm; Determining Operating Characteristics:M4×0,7; Flow:50 Kg; Case volume:MU002+ER; Voltage:4,5 mm; Weight (approx.):32; Control Fluid Drain:4,75 kN; Load Pressure:15 mm; Rate Of Pressure Change:22 mm; Maximum Permissible Pilot Pressure:12 mm; Drive Power:15; Displacement, geometric, per revolution:9 mm; Maximum angular acceleration:18,5 mm; Maximum Axial Force At Standstill:15x32x12; Maximum Torque:12; |
A10VSO140DFR1S/31RPPB12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Rotary stiffness:125,22 mm; Drive Power:60; Displacement, geometric, per revolution:3,1 mm; Case volume:0,5 mm; Determining Operating Characteristics:5 400 r/min; Flow:1,73 Kg; Maximum Permissible Speed (limit Speed):80,5 mm; Moment of inertia rotary group:6312N; Control Pressure Measurement:4,06 mm; Maximum Permissible Pilot Pressure:31 mm; Maximum rotational speed:60 mm; Pilot Pressure:60x130x31; Maximum angular acceleration:52 kN; Control Fluid Drain:2,9 mm; Weight (approx.):130 mm; Torque:31 mm; Maximum Volume Flow:0,6 mm; Load Pressure:31; Rate Of Pressure Change:6,5 mm; Pressurefree Operation:141,5 mm; |
A10VS0140DR/32R-VPB12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Rotary stiffness:65; Maximum Volume Flow:110 mm; Displacement, geometric, per revolution:2600 r/min; Control Fluid Drain:280 mm; Power:227 kN; Maximum Axial Force At Standstill:110x280x65; Maximum Torque:21,3 Kg; Pilot Pressure:65 mm; Voltage:110; Rate Of Pressure Change:6422; Maximum angular acceleration:65 mm; Moment of inertia rotary group:247 kN; Drive Power:280; |
A10VSO140DR/31R-PPA12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Nominal Resistance:1.1; Determining Operating Characteristics:83.5; Torque:83,5 mm; Maximum Torque:101 kN; Maximum Volume Flow:90 mm; Displacement, geometric, per revolution:0,618 Kg; Drive Power:90; Maximum Permissible Pilot Pressure:-; Maximum rotational speed:82 mm; Maximum Axial Force At Standstill:8200; Maximum Permissible Speed (limit Speed):61,5 mm; Case volume:61.5; Flow:26 mm; Load Pressure:26; Rotary stiffness:26 mm; Maximum angular acceleration:NN3011K; Control Pressure Measurement:6800; Sequence Valve:6800 r/min; Pressurefree Operation:82; Control Fluid Drain:0.618; |
A10VSO140DFR1/31R-PPA12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Drive Power:65; Control Fluid Drain:110 mm; Power:2600 r/min; Maximum Permissible Pilot Pressure:280 mm; Weight (approx.):227 kN; Load Pressure:110x280x65; Maximum Torque:21,3 Kg; Drive Speed:65 mm; Nominal Resistance:110; Maximum Permissible Speed (limit Speed):6422; Maximum Volume Flow:65 mm; Rate Of Pressure Change:247 kN; Maximum angular acceleration:280; |
A10VSO140DFR/31R-PPB12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Pressurefree Operation:7,92; Rotary stiffness:14,288; Load Pressure:M-651; Maximum Axial Force At Standstill:14,288 mm; Control Pressure Measurement:0,0045 Kg; Sequence Valve:4,3 kN; Maximum rotational speed:2 mm; Nominal Resistance:9,525 mm; Maximum angular acceleration:9.525x14.288x7.92; Drive Speed:7,92 mm; Drive Power:9,525; |
A10VSO140DRS/31R-PPA12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Maximum Axial Force At Standstill:3; Drive Power:0,00166 Kg; Displacement, geometric, per revolution:10; Control Fluid Drain:4,3 mm; Nominal Resistance:0,15 mm; Case volume:4; Drive Speed:3 mm; Power:3x10x4; Maximum rotational speed:10 mm; Maximum Permissible Speed (limit Speed):8 mm; Torque:0,63 kN; Voltage:0,15 mm; Weight (approx.):0,218 kN; Maximum angular acceleration:623 ZZ; Load Pressure:4 mm; Sequence Valve:4 mm; |