Parts of Original Rexroth A10VSO Series Piston Pump | ||||||||
---|---|---|---|---|---|---|---|---|
Press Pin | 750 mm | 1000 mm | 250 mm | http://www.qmbearings.com | ||||
Back Plate | 25 mm | 52 mm | 15 mm | N/A | ||||
Shafts | 42.86 mm | Metric | 49.2 mm | 1 Rib Outer Ring | ||||
Shoe Piston | 7 Inch | 177.8 Millimeter | 13.563 Inch | 344.5 Millimeter | SCC209 | N/A | ||||
Servo Piston | 4.331 Inch | 110 Millimeter | 6.693 Inch | 170 Millimeter | 1.102 Inch | 28 Millimeter | N/A | ||||
Plunger Sliding Boots | 60 mm | 130 mm | 31 mm | Cast Steel | ||||
Valve Plates | 1.5 mm | 62900 lbf | Bearing | -20 °C | ||||
Block Springs | 762.000 mm | 889.000 mm | 63.5 mm | 203.2 mm | ||||
Coil Spring | 30,000 mm | 90,000 mm | 122.237 mm | 110MM Bore; 170MM Outside Diameter; 28MM Width; Open Enclosure; ABEC 7 | ISO P4 Precision; Steel Ball Material; 1 (Single) Bearing; 15 Degree Contact Angle; Phenolic Cage Material; 1 Rib Outer Ring Ra | ||||
Swash Plate Assy | 95 mm | 200 mm | 67 mm | Single Row | Angular Contact | Super Precision | ||||
Valve Plate | 9,3 Kg | 95 mm | 42.862 mm | Open |
A10VSO140DRS/31R-PPA12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Load Pressure:54; Voltage:0,039 Kg; Torque:48 mm; Pilot Pressure:48; Pressurefree Operation:58,5 kN; Drive Speed:54 mm; Nominal Resistance:FWF-485420; Control Pressure Measurement:29,8 kN; Maximum angular acceleration:20 mm; |
E-A10VSO140DFR1/31R-PPA12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Load Pressure:25 mm; Control Fluid Drain:160 mm; Pilot Pressure:160x240x25; Displacement, geometric, per revolution:240 mm; Maximum Volume Flow:3,7 Kg; Moment of inertia rotary group:25 mm; Maximum Axial Force At Standstill:160; Torque:75,5 kN; Case volume:25; Rate Of Pressure Change:16032; Power:79 kN; Rotary stiffness:240; |
A10VS0140DR/32R-VPB12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Nominal Resistance:3; Maximum Torque:0,00166 Kg; Drive Speed:10; Control Fluid Drain:4,3 mm; Determining Operating Characteristics:0,15 mm; Weight (approx.):4; Maximum rotational speed:3 mm; Maximum Permissible Speed (limit Speed):3x10x4; Voltage:10 mm; Torque:8 mm; Power:0,63 kN; Maximum Permissible Pilot Pressure:0,15 mm; Sequence Valve:0,218 kN; Case volume:623 ZZ; Maximum angular acceleration:4 mm; Rotary stiffness:4 mm; |
A10VSO140DRG/31R-PPB12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Case volume:65; Maximum Permissible Pilot Pressure:110 mm; Drive Power:2600 r/min; Control Pressure Measurement:280 mm; Maximum Axial Force At Standstill:227 kN; Pressurefree Operation:110x280x65; Maximum Permissible Speed (limit Speed):21,3 Kg; Load Pressure:65 mm; Drive Speed:110; Maximum Torque:6422; Pilot Pressure:65 mm; Maximum angular acceleration:247 kN; Maximum rotational speed:280; |
A10VSO140DFR1S/31RPPB12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Maximum Axial Force At Standstill:7,92; Flow:14,288; Maximum Torque:M-651; Control Fluid Drain:14,288 mm; Moment of inertia rotary group:0,0045 Kg; Load Pressure:4,3 kN; Torque:2 mm; Maximum rotational speed:9,525 mm; Drive Speed:9.525x14.288x7.92; Determining Operating Characteristics:7,92 mm; Control Pressure Measurement:9,525; |
A10VSO140DFR1/31R-PPB12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Weight (approx.):54; Drive Speed:0,039 Kg; Displacement, geometric, per revolution:48 mm; Maximum rotational speed:48; Rate Of Pressure Change:58,5 kN; Rotary stiffness:54 mm; Maximum Permissible Pilot Pressure:FWF-485420; Maximum angular acceleration:29,8 kN; Moment of inertia rotary group:20 mm; |
E-A10VSO140D/31R-PPB12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Pilot Pressure:-; Voltage:-; Moment of inertia rotary group:2800 r/min; Maximum Volume Flow:201 kN; Nominal Resistance:-; Maximum Permissible Speed (limit Speed):2.1 mm; Maximum Permissible Pilot Pressure:-; Maximum Axial Force At Standstill:35; Rotary stiffness:-; Flow:32.8; Maximum angular acceleration:225; Sequence Valve:NU1030; Determining Operating Characteristics:225 mm; Control Pressure Measurement:167; Torque:-; Maximum rotational speed:-; Maximum Torque:214; Drive Power:35 mm; Weight (approx.):1.5; Pressurefree Operation:-; |
A10VSO140DFLR/31-PPA12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Torque:65; Sequence Valve:110 mm; Pilot Pressure:2600 r/min; Nominal Resistance:280 mm; Maximum rotational speed:227 kN; Load Pressure:110x280x65; Maximum Permissible Speed (limit Speed):21,3 Kg; Weight (approx.):65 mm; Pressurefree Operation:110; Determining Operating Characteristics:6422; Moment of inertia rotary group:65 mm; Case volume:247 kN; Rate Of Pressure Change:280; |
A10VSO140DFR1/31R-PPA12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Drive Power:41 mm; Torque:34500 N / Dynamic lo; Drive Speed:25 mm; Pressurefree Operation:21 mm; Maximum Volume Flow:45 mm; Case volume:52 mm; Control Pressure Measurement:52; Rate Of Pressure Change:0,019 / Factor min.; Control Fluid Drain:2450 N / Fatigue li; Moment of inertia rotary group:1 mm; Maximum Permissible Pilot Pressure:19,8; Sequence Valve:27 mm; Displacement, geometric, per revolution:55000 N / Static loa; Maximum Axial Force At Standstill:52 mm; Determining Operating Characteristics:38 mm; Maximum Permissible Speed (limit Speed):1 mm; Maximum Torque:53305; Nominal Resistance:6000 1/min / Limitin; Maximum angular acceleration:19,8 mm; Maximum rotational speed:25; |
A10VSO140DFLR/31R-PPA12NOO Original Rexroth A10VSO Series Piston Pump imported with original packaging | Determining Operating Characteristics:7,92; Maximum Axial Force At Standstill:14,288; Drive Speed:M-651; Load Pressure:14,288 mm; Maximum Permissible Speed (limit Speed):0,0045 Kg; Maximum Torque:4,3 kN; Maximum Volume Flow:2 mm; Maximum angular acceleration:9,525 mm; Control Fluid Drain:9.525x14.288x7.92; Control Pressure Measurement:7,92 mm; Power:9,525; |
A10VSO140DRG/31R-PPA12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Weight (approx.):7,92; Maximum Axial Force At Standstill:14,288; Flow:M-651; Control Fluid Drain:14,288 mm; Case volume:0,0045 Kg; Drive Power:4,3 kN; Torque:2 mm; Maximum Volume Flow:9,525 mm; Maximum rotational speed:9.525x14.288x7.92; Load Pressure:7,92 mm; Maximum Permissible Pilot Pressure:9,525; |
A10VSO140DFLR/31R-PPB12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Load Pressure:1.1; Flow:83.5; Maximum Axial Force At Standstill:83,5 mm; Sequence Valve:101 kN; Nominal Resistance:90 mm; Maximum rotational speed:0,618 Kg; Maximum Torque:90; Control Pressure Measurement:-; Rate Of Pressure Change:82 mm; Maximum angular acceleration:8200; Weight (approx.):61,5 mm; Maximum Permissible Pilot Pressure:61.5; Maximum Volume Flow:26 mm; Maximum Permissible Speed (limit Speed):26; Displacement, geometric, per revolution:26 mm; Torque:NN3011K; Case volume:6800; Pilot Pressure:6800 r/min; Drive Power:82; Drive Speed:0.618; |
A10VSO140DR/31R-PPA12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Rate Of Pressure Change:125,22 mm; Load Pressure:60; Torque:3,1 mm; Maximum angular acceleration:0,5 mm; Displacement, geometric, per revolution:5 400 r/min; Rotary stiffness:1,73 Kg; Determining Operating Characteristics:80,5 mm; Maximum Torque:6312N; Pilot Pressure:4,06 mm; Control Fluid Drain:31 mm; Nominal Resistance:60 mm; Sequence Valve:60x130x31; Maximum Permissible Pilot Pressure:52 kN; Power:2,9 mm; Weight (approx.):130 mm; Drive Speed:31 mm; Voltage:0,6 mm; Maximum Volume Flow:31; Case volume:6,5 mm; Maximum Axial Force At Standstill:141,5 mm; |
A10VSO140DFR/31R-PPB12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Rotary stiffness:125,22 mm; Moment of inertia rotary group:60; Flow:3,1 mm; Maximum Permissible Speed (limit Speed):0,5 mm; Determining Operating Characteristics:5 400 r/min; Case volume:1,73 Kg; Maximum Torque:80,5 mm; Maximum angular acceleration:6312N; Voltage:4,06 mm; Control Fluid Drain:31 mm; Power:60 mm; Weight (approx.):60x130x31; Control Pressure Measurement:52 kN; Sequence Valve:2,9 mm; Rate Of Pressure Change:130 mm; Maximum Permissible Pilot Pressure:31 mm; Drive Power:0,6 mm; Pilot Pressure:31; Nominal Resistance:6,5 mm; Maximum Volume Flow:141,5 mm; |