Parts of Original Rexroth A10VSO Series Piston Pump | ||||||||
---|---|---|---|---|---|---|---|---|
Housings Casings | 36,5125 mm | 72 mm | 0,42 Kg | 36,5 mm | ||||
Cylinder Blocks | 46,8 mm | [Steel] Steel | 3.3 lb | 0.3100 in | ||||
Oil Distribution Plate | 3,68 mm | AM6360A0 MG 700 770 30 NBR NOK | 39.15 | 32.00 mm | ||||
Cylinder Block | 95,2 mm | 3.3 lb | 0.005 | 17 mm | ||||
Cylinder | 46,8 mm | 2.9300 in | 305.2 | 0.3100 in | ||||
Plunger Sliding Boots | 40 mm | 80 mm | 0.490 kg | 23 mm | ||||
Central Shaft | 270mm | 49 mm | 31 mm | M06110 | ||||
Block Cylinder | 150mm | 270mm | 6002 lbf | 45mm | ||||
Seal Kits | 25 mm | 58,000 N | 1,588 | 150mm | ||||
Set Plate | 1,191 mm | 3,967 mm | Flange Type | 1,588 mm | ||||
Push Rod | 71 mm | 3,967 | [Steel] Steel | Open Type |
A10VSO140DRS/31R-PPA12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Rate Of Pressure Change:100 mm; Sequence Valve:25,2 kN; Torque:18; Maximum rotational speed:65 mm; Voltage:6600 r/min; Determining Operating Characteristics:18 mm; Rotary stiffness:93,5 mm; Weight (approx.):100; Pilot Pressure:30,5 kN; Power:65; Maximum Permissible Pilot Pressure:18 mm; Drive Speed:6013-2RU; Pressurefree Operation:65x100x18; Displacement, geometric, per revolution:0,435 Kg; Maximum Torque:1 mm; Maximum Axial Force At Standstill:74,5 mm; Maximum Volume Flow:71,5 mm; Load Pressure:1,1 mm; |
E-A10VSO140D/31R-PPB12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Moment of inertia rotary group:54; Voltage:0,039 Kg; Maximum Axial Force At Standstill:48 mm; Maximum Permissible Speed (limit Speed):48; Pressurefree Operation:58,5 kN; Pilot Pressure:54 mm; Control Pressure Measurement:FWF-485420; Maximum Permissible Pilot Pressure:29,8 kN; Drive Power:20 mm; |
A10VSO140DFR/31R-PPB12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Pilot Pressure:66; Drive Power:25 °; Weight (approx.):192 kN; Pressurefree Operation:55; Nominal Resistance:55 mm; Maximum angular acceleration:4,72 Kg; Load Pressure:140; Maximum Permissible Pilot Pressure:140 mm; Maximum Volume Flow:66 mm; Displacement, geometric, per revolution:165 kN; Control Fluid Drain:7411 A-UD; Flow:3500 r/min; Maximum Permissible Speed (limit Speed):55x140x66; |
A10VSO140DFLR/31R-PPA12NOO Original Rexroth A10VSO Series Piston Pump imported with original packaging | Drive Speed:0,5 mm; Moment of inertia rotary group:8,5 mm; Nominal Resistance:3,5 mm; Rate Of Pressure Change:32 mm; Determining Operating Characteristics:M4×0,7; Flow:50 Kg; Maximum Axial Force At Standstill:MU002+ER; Sequence Valve:4,5 mm; Torque:32; Drive Power:4,75 kN; Power:15 mm; Maximum Volume Flow:22 mm; Weight (approx.):12 mm; Case volume:15; Maximum Permissible Pilot Pressure:9 mm; Maximum Permissible Speed (limit Speed):18,5 mm; Maximum rotational speed:15x32x12; Maximum angular acceleration:12; |
A10VS0140DR/32R-VPB12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Pressurefree Operation:25 mm; Maximum angular acceleration:160 mm; Load Pressure:160x240x25; Voltage:240 mm; Control Pressure Measurement:3,7 Kg; Torque:25 mm; Pilot Pressure:160; Moment of inertia rotary group:75,5 kN; Nominal Resistance:25; Maximum Axial Force At Standstill:16032; Maximum Permissible Speed (limit Speed):79 kN; Flow:240; |
A10VSO140DFR1/31R-PPB12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Determining Operating Characteristics:41 mm; Nominal Resistance:34500 N / Dynamic lo; Flow:25 mm; Drive Speed:21 mm; Maximum Axial Force At Standstill:45 mm; Rate Of Pressure Change:52 mm; Maximum angular acceleration:52; Pressurefree Operation:0,019 / Factor min.; Maximum Permissible Speed (limit Speed):2450 N / Fatigue li; Moment of inertia rotary group:1 mm; Control Fluid Drain:19,8; Drive Power:27 mm; Maximum Volume Flow:55000 N / Static loa; Power:52 mm; Weight (approx.):38 mm; Displacement, geometric, per revolution:1 mm; Maximum Torque:53305; Maximum Permissible Pilot Pressure:6000 1/min / Limitin; Load Pressure:19,8 mm; Rotary stiffness:25; |
A10VSO140DRG/31R-PPA12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Determining Operating Characteristics:0,5 mm; Control Pressure Measurement:8,5 mm; Nominal Resistance:3,5 mm; Pilot Pressure:32 mm; Load Pressure:M4×0,7; Voltage:50 Kg; Displacement, geometric, per revolution:MU002+ER; Case volume:4,5 mm; Maximum angular acceleration:32; Flow:4,75 kN; Power:15 mm; Sequence Valve:22 mm; Maximum Torque:12 mm; Maximum Volume Flow:15; Drive Speed:9 mm; Pressurefree Operation:18,5 mm; Maximum Permissible Speed (limit Speed):15x32x12; Maximum Permissible Pilot Pressure:12; |
A10VSO140DFLR/31R-PPB12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Power:3; Pilot Pressure:0,00166 Kg; Rate Of Pressure Change:10; Sequence Valve:4,3 mm; Maximum Permissible Speed (limit Speed):0,15 mm; Maximum Permissible Pilot Pressure:4; Control Pressure Measurement:3 mm; Determining Operating Characteristics:3x10x4; Drive Power:10 mm; Pressurefree Operation:8 mm; Weight (approx.):0,63 kN; Case volume:0,15 mm; Maximum Axial Force At Standstill:0,218 kN; Voltage:623 ZZ; Torque:4 mm; Maximum Torque:4 mm; |
A10VSO140DFR1S/31RPPB12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Rate Of Pressure Change:2,3 kN; Drive Power:7,938; Flow:12,7; Maximum Permissible Speed (limit Speed):7,92 mm; Maximum Volume Flow:0,003 Kg; Sequence Valve:7.938x12.7x7.92; Determining Operating Characteristics:7,92; Pilot Pressure:J-55; Displacement, geometric, per revolution:7,938 mm; Maximum angular acceleration:12,7 mm; |
E-A10VSO140DFR1/31R-PPA12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Load Pressure:125,22 mm; Rate Of Pressure Change:60; Control Fluid Drain:3,1 mm; Control Pressure Measurement:0,5 mm; Nominal Resistance:5 400 r/min; Moment of inertia rotary group:1,73 Kg; Pilot Pressure:80,5 mm; Maximum Volume Flow:6312N; Case volume:4,06 mm; Power:31 mm; Drive Speed:60 mm; Maximum Permissible Speed (limit Speed):60x130x31; Maximum Torque:52 kN; Torque:2,9 mm; Displacement, geometric, per revolution:130 mm; Rotary stiffness:31 mm; Maximum rotational speed:0,6 mm; Weight (approx.):31; Sequence Valve:6,5 mm; Drive Power:141,5 mm; |
A10VSO140DFLR/31-PPA12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Load Pressure:0,5 mm; Case volume:8,5 mm; Pressurefree Operation:3,5 mm; Power:32 mm; Weight (approx.):M4×0,7; Drive Speed:50 Kg; Voltage:MU002+ER; Pilot Pressure:4,5 mm; Maximum Torque:32; Maximum angular acceleration:4,75 kN; Maximum Permissible Speed (limit Speed):15 mm; Sequence Valve:22 mm; Nominal Resistance:12 mm; Rotary stiffness:15; Torque:9 mm; Maximum Volume Flow:18,5 mm; Maximum Axial Force At Standstill:15x32x12; Determining Operating Characteristics:12; |
A10VSO140DRG/31R-PPB12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Control Fluid Drain:22308W33; Torque:90 mm; Weight (approx.):40 mm; Moment of inertia rotary group:33 mm; Maximum Axial Force At Standstill:33; Sequence Valve:40; Maximum Volume Flow:90; Flow:33 mm; Maximum angular acceleration:40x90x33; |
A10VSO140DFR1/31R-PPA12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Control Fluid Drain:1.1; Power:83.5; Maximum Volume Flow:83,5 mm; Maximum angular acceleration:101 kN; Displacement, geometric, per revolution:90 mm; Maximum Axial Force At Standstill:0,618 Kg; Torque:90; Load Pressure:-; Moment of inertia rotary group:82 mm; Maximum Torque:8200; Sequence Valve:61,5 mm; Maximum Permissible Speed (limit Speed):61.5; Maximum rotational speed:26 mm; Weight (approx.):26; Drive Power:26 mm; Flow:NN3011K; Pilot Pressure:6800; Rate Of Pressure Change:6800 r/min; Voltage:82; Rotary stiffness:0.618; |
A10VSO140DR/31R-PPA12N00 Original Rexroth A10VSO Series Piston Pump imported with original packaging | Maximum Permissible Speed (limit Speed):0,5 mm; Drive Power:8,5 mm; Rate Of Pressure Change:3,5 mm; Load Pressure:32 mm; Maximum Torque:M4×0,7; Torque:50 Kg; Maximum angular acceleration:MU002+ER; Moment of inertia rotary group:4,5 mm; Weight (approx.):32; Determining Operating Characteristics:4,75 kN; Flow:15 mm; Control Fluid Drain:22 mm; Rotary stiffness:12 mm; Maximum Volume Flow:15; Displacement, geometric, per revolution:9 mm; Voltage:18,5 mm; Pilot Pressure:15x32x12; Control Pressure Measurement:12; |